14electrolux use
After you have pressed the Start/Pause button and the machine has started, the 
Door icon is
When the programme has finished, a flashing zero (0.00) is displayed and the
(Door) icon desappears.
Delay
The selected delay (20 hours max) set by means of the relevant button appears on the display for about 3 seconds, then the duration of the previously selected programme is displayed. The relevant
phase icon 
is
The delay time value decreases by one unit every hour and then, when 1 hour remains, the time decreases every minute.
Time
Manager
Temp. | Spin | Easy Iron | Extra | Delay |
Rinse |
Start/
Pause
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example E20 (see paragraph “Something not working”).
Time
Manager
Temp. | Spin | Easy Iron | Extra | Delay |
Rinse |
Start/
Pause
End of programme
When the programme has finished a
flashing zero is displayed, the 
(Door) icon desappears and the door can be opened.
Time
Manager
Temp. | Spin | Easy Iron | Extra | Delay |
Rinse |
Start/
Pause
Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message Err is displayed at the bottom of the display for about 2 seconds and the integrated red Start/Pause light start flashing.
Time
Manager
Temp. | Spin | Easy Iron | Extra | Delay |
Rinse |
Start/
Pause
Heating phase
During the washing cycle the display shows the temperature icon animated to indicate that the appliance has started the heating phase of the water in the tub.
Time
Manager
Temp. | Spin | Easy Iron | Extra | Delay |
Rinse |
Start/
Pause