Technics SA-DA8 Vgca mode, Turn Input Selector to select the source Press Vgca, To turn Vgca off

Page 27

2

1

ON VIA TONE

 

1

 

INPUT SELECTOR

VGCA mode

This unit features a state-of-the-art variable gain control amplifier (VGCA). This feature cuts down greatly on noise encountered during normal use.

1 Turn [INPUT SELECTOR] to select the source.

2 Press [VGCA].

The “VIA TONE” indicator goes out and the “ON” indicator lights when “VGCA” is selected.

“VGCA ON” is displayed, then “DISPLAY OFF” scrolls across the display. The display then turns off.

If TUNER was chosen as the source, the current frequency is shown.

3 Start the desired source.

Follow your equipment’s operating instructions.

To confirm the current display

Press [VGCA].

The display comes on for about 4 seconds.

2

VGCA

ON

RS

RS

To turn VGCA off

ÁWhen the display is off 1Press [VGCA].

2Press [VGCA] again to turn VGCA off.

ÁWhen the display is on

Press [VGCA].

For your reference

You can set the VGCA mode for each source.

Each source will retain the selected mode.

Note

ÁTone quality (bass and treble) cannot be adjusted in this mode.

ÁIn STEREO mode, no sound comes from the subwoofer when VGCA is turned on.

ÁThis mode can only be used with analogue input. VGCA is turned off if you select digital input.

ÁDSP sound modes cannot be selected while VGCA is on. These modes are also canceled when VGCA is turned on and STEREO mode is engaged.

Operations

To have the display on constantly

The display is turned off while VGCA is on to cut down on unnecessary noise. Do the following if you would prefer to have the display on.

1Turn [INPUT SELECTOR] to select a source other than TUNER.

2Press [VGCA] to turn VGCA on.

3 After the display turns off

Press and hold [VGCA] for about 4 seconds until the display comes on.

This setting remains active even if the unit is turned off.

Repeat the procedure to turn the display off again.

27

RQT5518

Image 27
Contents SA-DA8 Table of contents EB area code model only How to replace the fuseBefore use Before useSafety precautions Distance When using DVD 6CH Input modeTo enjoy surround sound SizeFront panel controls Name Ref.page $3Low impedance indicator LOW IMP $4Front speaker indicator$5Signal format indicators $6DSP sound mode indicators1TV volume buttons 0Direct tuning/disc enter button9DSP sound mode select button 1Delay time/level adjust buttonsConcerning the remote control Battery installationCorrect method of use Connection Connecting a DVD playerConnections Optical fiber cableOptical fiber cable not included Video cable not included Connecting video equipmentConnecting to the VCR 3 terminals on the front panel ConnectionsConnecting audio equipment Antenna connectionsConnections AC mains lead Connecting the AC mains lead and other informationPlacement of speakers Connecting speakersSpeaker connections Bi-wiring connection Connecting the cablesSpeaker impedance 6-16Ω Speaker connectionsPreparatory steps Speaker settingsPreparation ConnectionChannel to be set Complete the size settings forPress a to select Distance Press B to select the speakerAdjusting speaker output level Following indicators light depending on the source About the program format indicators L, C, R, LS, S, LFE, RSStereo mode Surround modeDSP sound modes SFC modesIf the DTS source you are playing is not recognized Press /l Select the speaker systems to be used Press Digital Input to select the desired input modePress DSP Sound Mode to select Desired mode Enjoying the soundsMode Start the source Adjust the volumeOperations Press SFC to select the desired SFCPress Tape Monitor Ensure BI-AMP lights when BI-WIRE isTo enjoy bi-amp sound SelectedWhen using the VCR 3 terminals To adjust the tone qualityTo adjust the sound balance Turn Balance to adjust the left/right sound balanceSwitching DVD analogue input Turn Input Selector to select DVD Press DVD 6CH InputStart the desired source To turn Vgca off Vgca modeTurn Input Selector to select the source Press Vgca To confirm the current displayIf there is hissing or thumping while the radio is playing Sequential tuningIf noise is excessive in the FM stereo mode RadioPress TUNER/BAND Direct tuningFunctions RadioPreset tuning Radio functions Press PRESET, Display Mode To display RDS informationPress RDS Program type PTY search and EON tuningPress RDS Press Tuning Selector to select the desiredTo check the program type while on reception standby EON tuningWhen no EON is displayed Press FM MODE, EONDisplay Explanation About the PTY displayTo listen through headphones Other functionsDynamic range compression Press Muting When using the unit in a darkened roomOthers To mute the sound levelSA-DA10 Remote controlTo select radio stations by frequency Remote controlTo operate the receiver To select the desired channel directlyDirect Tuning Remote controlTo operate a cassette deck To operate a CD player or MD deckSA-DA8 To watch TV broadcasts To watch video tapesTo fast-forward or rewind the video tape To stop play DVD To select a group To stop play To operate a DVD playerTo start siow-motion play To select still pictures Page skipSA-DA10 only To change the remote control code TV codes To monitor sound being recorded onto a tape deck Making a recordingRecording on a tape deck or VCR Begin the source to be recordedReference Timer functionSetting the timers Press TIMER, -MODE, -TIME to select the desired timer modeWhile listening to AM broadcasts Troubleshooting guideProblem Probable causes Suggested remedy Pages While listening to FM broadcastsIf the surfaces are dirty Reset functionMaintenance Common ProblemsSpecifications DIN 45

SA-DA8, SA-DA10 specifications

The Technics SA-DA8 and SA-DA10 are renowned audio receivers that were pivotal in the evolution of home audio systems in the late 1990s and early 2000s. Both models reflect Technics' commitment to high-quality sound and innovative technology, appealing to audiophiles and casual listeners alike.

One of the standout features of the SA-DA8 and SA-DA10 is their extensive multi-channel audio capabilities, which support various surround sound formats. These receivers are equipped to handle Dolby Digital, DTS, and THX surround sound, creating an immersive listening experience that rivals even high-end home theaters. The SA-DA10, in particular, provides a more advanced digital signal processing capability, making it suitable for both music and movie enthusiasts.

Both models incorporate Technics' proprietary "Digital Signal Processor" technology, which allows users to customize sound fields to match their preferred listening environment. This is especially beneficial for home theaters, where room acoustics can significantly impact audio performance. The receivers also boast a range of inputs, including multiple digital and analog connections, making it easy to integrate various media devices, such as DVD players, gaming consoles, and CD players.

Audio quality is a central aspect of the SA-DA8 and SA-DA10. They feature high-performance 24-bit DACs that enhance audio resolution, ensuring a clean and detailed sound. The dynamic power output ensures that even the most demanding soundtracks can be played without distortion, making them ideal for high-energy action movies or concert recordings.

Another notable characteristic of these receivers is their user-friendly design. The front panel includes an easy-to-navigate display and controls for adjusting settings on the fly. Additionally, the receivers feature a remote control that provides full access to all functions, elevating the convenience of handling multiple audio sources.

The build quality of the Technics SA-DA8 and SA-DA10 is robust, with a design that resonates with the brand's stature in the audio industry. Their timeless aesthetic, coupled with modern capabilities, have allowed these models to remain popular in retro audio circles.

In summary, the Technics SA-DA8 and SA-DA10 exemplify superior sound engineering through their multi-channel audio support, advanced DSP technology, and high-quality construction. These receivers continue to exemplify Technics' legacy of delivering exceptional audio experiences for enthusiasts around the globe.