Whirlpool LI._7681XM manual Lint screen, End-of-cycle signal

Page 8

End-of-cycle signal

The dryer sounds a signal to let you know when the cycle is finished. The signal cannot be turned off and is not adjustable.

The signal is helpful when you are drying

permanent press, synthetics and other items that should be taken out as soon as the dryer stops.

Lint signal

If you neglect to clean your lint screen, the signal will sound. The [whistle tone] signal lets you know the air flow is being restricted. Restricted air flow reduces drying efficiency.

Turn off the dryer and clean the lint screen as shown below.

Lint screen

Clean the lint screen before each load. A screen blocked by lint can

increase drying time and may be a FIREHAZARD.

Open the lid and pull the lint screen straight out.

dryer with the lint screen

tloose,ARNING:damagedDO NOTor missingrun the. Doing so can cause over-

heating, can damage fabrics and can be a FIRE HAZARD.

ROLL the lint off the screen

with your fingers.

DO NOT rinse or wash the screen.

Push the screen firmly back into place.

Image 8
Contents Automatic Dryers Contents Your Responsibilities Isproperly maintainedSelecting Cycle Push Select a Set TemperatureChanging a setting Operating instructions Automatic cyclesTumble Press Setting Drying timesEnd-of-cycle signal Lint screenLint removal Electric Dryers GAS DryersCaring for your dryer Vacation careBefore calling for assistance Whir l ool Automatic Dryers Contents Your Responsibilities Selecting Cycle Cycle Operating instructions Drying Lint screen Lint removal Caring for your dryer Before calling for assistance Whir l ool