Dryer Description, To open the door, Features

Dryer Description

To open the door

Press and release the front panel in position shown

Condenser Unit (cover open)

The features

Water container Rating plate

Model & Serial numbers

		Air intake



Condenser cover		grille
Condenser cover handle	Filter
(Pull to open)

Information	Important

Installation
Description

Control panel

PROGRAMME

Selection Buttons

ON/OFF

Button

Display Unit

OPTION

Buttons & Lights

CHILD LOCK

Button

START/PAUSE

Button & Light

TheDisplay

Programmes Start and

Laundry

The ON/OFF button/light : If the dryer is running and this button is pressed, the dryer is turned off. Press again, the dryer restarts.

The PROGRAMME selection buttons set the programme: press the button corresponding to the programme you want to select (see Start and Programmes).

The OPTION buttons/indicators: these buttons select available options for your selected programme (see The Controls). The indicators on the display unit next to the buttons light to show that the option has been selected.

The START/PAUSE button/light starts a selected programme. When you press this button there will be

one beep and the display will show PAUSED . When a programme is running, holding this button in pauses the programme and stops the dryer.

The light is green when the programme is running, flashing amber if the programme has been paused or flashing green if on standby waiting to start a programme (see Start and Programmes).

The Display Unit gives warnings and information about the programme (see next page).

The CHILD LOCK button/icon : Press and hold this button after selecting your programme and any options, this prevents the programme settings from being

changed, the display will briefly show LOCKED . When the icon is lit, the other buttons are disabled. Hold the button to cancel and the icon will go out, the display will briefly show UNLOCKED .

Note: This tumble dryer, in compliance with new energy saving regulations, is fitted with an automatic standby system which is enabled after about 30 minutes if no activity is detected. Press the ON-OFF button briefly and wait for the machine to start up again.

Suggestions	Warningsand
andCare	Maintenance

Troubleshooting
Service