Electrolux 50520 manual Carrying out an Emergency Emptying

Page 29

Operating Instructions

Carrying out an Emergency Emptying

If the washing machine no longer pumps out the water an emergency emptying must be carried out.

If the washing machine is located in a room in which below freezing temperatures might occur, emergency emptying must be carried out if danger of freezing occurs.

Furthermore, the inlet hose must be disconnected from the tap, drained and laid on the floor.

1 Warning! Switch the washing machine off and pull the mains plug prior to emergency draining.

Warning! The water, which flows out of the emergency emptying hose can be hot. First allow the water to cool down before emergency emp- tying!

0 1. Have a flat container on hand to catch the water running out.

2.Pull down the flap in the left corner of the base strip (1) and remove it (2).

3.Remove the emergency emptying hose

from its holder.

4. Pull the emergency emptying hose out a little.

5.Place the container under the hose.

6. Undo and remove the plug in the end of the emergency emptying hose by turning it anti-clockwise (1) and pull it out (2).

The wash-water runs out. Depending upon the amount of water, it may be necessary to empty the container several times. Temporarily close the emergency emptying hose with the plug.

29

Image 29
Contents Lavamat Dear Customer Contents Contents Installation and Connection Instructions Intended Use Safety InstructionsPrior to Initial Start-up General Safety Child SafetyEnvironmental Tips DisposalDetergent Dispenser Drawer Description of the ApplianceFront View Program Selector Control panelDelicates ON/OFF Button Temperature SelectorConsumption Data and Time Required Sorting and preparing a wash load Before Using for the First TimePreparing a Wash Load Detergents and Conditioners Washing Types and Care SymbolsLaundry Bleach Which Detergent?Fabric Conditioners Which form?How much Detergent and Fabric Softener? Using a Water Softening AgentBrief Instructions Performing a Washing CycleAdding Detergent/Conditioner Loading the WashingStarting the Washing Program Setting the Washing ProgramDuring the Washing Program Changing the Spin Speed or Selecting Rinse HoldWashing Cycle Complete/Removing the Washing Washing Program TablesSeparate Rinsing Washing with a Pre WashSeparate Gentle Rinsing/Starching/Conditioning Separate SpinningDoor Maintenance and CleaningWashing Machine Drum What to do when… Trouble ShootingAppliance does not spin, water in the drum Possible Cause If the Washing Results are not Satisfactory Carrying out an Emergency Emptying Cleaning the Drain Pump 0870 5 929 Service & Spare PartsGuarantee Conditions France Senlis +33 44 62 29 Germany Nürnberg +49 Installation Safety Precautions Installation and Connection InstructionsRear View Appliance DimensionsFront and Side Views Appliance Transit Appliance InstallationRemoving Transit Packaging Installation-Site Preparation Levelling the Appliance Electrical Connection Permanent Connection Water Pressure Water ConnectionInlet Hose Connection Hot and Cold Water Connection Water Drainage AEG Service Force Technical DataIndex