Indesit IDV 65 S instruction manual Installation, Where to install the tumble dryer, Ventilation

Page 2
15 mm
15 mm

Installation

Where to install the tumble dryer

EN

• Install the dryer far from gas

 

 

 

 

ranges, stoves, radiators or

m

 

hobs, as flames may damage it.

 

10 m

 

If the dryer is installed below a

 

worktop, ensure there are 10

 

mmbetween the upper panel of the dryer and any objects above it, and 15 mm between the sides

of the machine and the walls or furniture units adjacent to it. This ensures adequate air circulation. Make sure the air inlets on the rear panel are not blocked or obstructed.

•You should also make sure that the room in which the tumble dryer is installed is not damp, and that it is adequately ventilated.

Ventilation

This appliance gently dries laundry by taking in cold, clean and relatively dry air, heating it and passing it through the fabric. To facilitate the drying process, damp air is expelled at the rear, through a ventilation hose. It is important that the room in which the tumble dryer is used is adequately ventilated, in order to avoid the recirculation of waste gases expelled by other appliances.

Mobile ventilation system

When using the tumble dryer with the mobile ventilation system, a ventilation hose must be connected. The hose should be securely fastened to the ventilation hole at the rear of the appliance (see “Description of the tumble dryer”). We recommend the hose is connected to an outlet near the tumble dryer, if possible. If it cannot be installed in a permanent spot, the tumble dryer will still function perfectly well if the ventilation hose is passed through a partially-opened window.

￿Make sure you do not point the ventilation hose towards the air inlet, which is located on the rear of the appliance.

￿The ventilation hose should not exceed a maximum length of 2.4 metres; it should also be shaken frequently to remove any fluff, dust or water deposits inside it. Make sure you do not crush the hose.

Fixed ventilation system

We recommend the ventilation hose is connected to a ventilation system for windows or doors, available from the retailer which originally sold you the appliance or from your local spare parts stockist.

downwards, so that the flow of air coming out is not impeded.

Areas A and B should be checked frequently, to prevent the accumulation of fluff or debris, particularly if the tumble dryer is used very often. The hose adaptor must be fitted correctly, in order to prevent damp air from coming back into the room.

Window ventilation hole

1. Theoretically, when the tumble dryer is operating with a full load, the ventilation hole should be directly behind the fan.

2. It is therefore important that the hose is as short as possible.

￿Make sure you do not push

the tumble dryer too far backwards, as this could lead to the ventilation hose being crushed, bent or even disconnected.

￿There should be no cuts, bottlenecks or “U”-shaped bends in the hose, as these could impede ventilation or trap condensation.

Ventilation through an open window

The end of the hose must be facing downwards, in order to prevent the hot, damp air from forming condensation in the room or the tumble dryer.

￿ Make sure that the tumble dryer is adequately ventilated,

and that the end of the ventilation hose is not pointing

towards the air inlet pipe on the rear of the appliance.

￿ The ventilation hose must always be fitted to ensure

correct tumble dryer operation.

￿ Make sure that the ventilation hose and the air inlet pipes

are not obstructed or blocked.

￿ Do not let the tumble dryer recirculate foul air.

￿ Improper use of the tumble dryer may result in fire

hazards.

￿ The air emitted by the tumble dryer should not be expelled

in the same duct as used for the fumes produced by

Wall ventilation hole

B

A

1.Leave an opening in the wall to the left of the tumble dryer installation site.

2.Make the hose as short and straight as possible, in order to prevent any dampness from condensing and leaking back into the appliance.

3.The hole in the wall must also be straight and pointing

different appliances which burn gas or other fuels.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Tumble Dryer Ventilation InstallationWhere to install the tumble dryer Preliminary information Electrical connectionsLevelling the tumble dryer Rear side Description of the tumble dryerFront side Control panelHow to carry out a drying cycle Starting a drying programmeDrying programmes and options Drying settingsDrying times Care labels LaundrySorting laundry Special itemsInformation on recycling and disposal General safetySuggestions Saving energy and respecting the environmentCleaning the filter after each cycle Care and maintenanceDisconnecting the power supply Cleaning the tumble dryerAssistance Centre see Assistance TroubleshootingProblem Possible causes / Solutions Before contacting the Technical Assistance Centre AssistanceSpare parts Replacement of any removable parts made of glass or plastic GuaranteeMonths Parts and Labour Guarantee Months from the date of purchaseRecycling & Disposal Information After Sales ServiceEssential Contact Information Page Page 195075035.00
Related manuals
Manual 16 pages 4.26 Kb

IDV 65, IDV 65 S specifications

The Indesit IDV 65 S is a vented tumble dryer that delivers efficiency, convenience, and performance, making it an ideal choice for busy households. This model exemplifies modern drying technology with its user-friendly design and practical features.

One of the main highlights of the IDV 65 S is its substantial 6.5 kg drying capacity. This spacious drum allows users to efficiently dry a variety of garments in one load, from bed linens to everyday wear, reducing the frequency of laundry days. The dryer’s compact design ensures it can fit into small spaces, making it suitable for apartments or utility rooms without sacrificing its drying capabilities.

The tumble dryer boasts multiple drying programs, including options for a quick drying cycle, delicate fabrics, and heavy-duty items. The variety of settings ensures that clothes are treated appropriately, prolonging their lifespan while achieving optimal drying results. Users can select their desired program easily using the intuitive dial controls, which also feature a clear display for added convenience.

In terms of technology, the Indesit IDV 65 S is equipped with a reverse action drum, which helps to reduce tangling and minimize creases in dried laundry. This innovative feature encourages better airflow, leading to faster and more efficient drying. Additionally, the dryer includes a filter alert system that notifies users when the lint filter needs cleaning, promoting optimum efficiency and safety.

Energy efficiency is another aspect of the IDV 65 S. With a respectable energy rating, it helps households save on utility bills while being environmentally friendly. Proper care and maintenance, such as keeping the filter clean, can further enhance the dryer’s efficiency and energy consumption.

Safety features are crucial for peace of mind, and the Indesit IDV 65 S includes a range of them. The dryer is designed to prevent overheating, and its child lock function ensures that little ones remain safe while in use.

In summary, the Indesit IDV 65 S is a dependable vented tumble dryer that combines practicality, efficiency, and advanced technology. With its generous capacity, versatile drying programs, and user-friendly features, this model stands out as a reliable solution for all your drying needs. Whether you have a family to keep up with or simply want to streamline your laundry routine, the Indesit IDV 65 S is a solid choice.
Top Page Image Contents