| Options |
| |
EN | The options allow for customising the selected programme according to one’s own needs. |
| Delay timer |
| |
| The start of some programmes (see Programmes and options) may be delayed up to 9 hours. Press the button repeatedly to |
| enter the desired delay time. Before setting a delayed start, make sure that the water container is empty and that the filter is clean. |
| Post Care |
| When this option is selected, the drum rotates garments at intervals after the cold drying cycle has ended, in order to avoid |
| creases forming on garments if they cannot be immediately removed at the end of the programme. During this phase, the indicator |
| light is turned on. |
| Pre Care |
| When this option is selected in addition to the “Delay timer” option, the drum rotates garments at intervals during the delay period |
| to avoid creases forming. |
| High Heat |
| When a drying time is selected, pressing this button sets high heat drying and the indicator light above the button lights up. The |
| timed programmes are |
Not all options are available on all programmes (see Programmes and options).
Opening the door
If the door is opened (or the START/PAUSE button is pressed) while a programme is running, the dryer stops and the following may occur:
•The START/PAUSE button flashes orange.
•When a delayed start is running, the delay countdown continues. It is necessary to press the START/PAUSE button to resume the “Delay timer” programme. One of the “Delay timer” indicator light flashes to signal the delay time entered.
•It is necessary to press the START/PAUSE button to resume the programme. The progress indicator lights signal the running phase and the START/PAUSE indicator light stops flashing and turns green.
•During the post care phase, the programme ends. Pressing the START/PAUSE button reactivates a new programme from the beginning.
•By turning the Programme selection knob, a new programme is selected and the START/PAUSE indicator light flashes green. This procedure can be used to select the Cold drying programme to cool garments if they are judged to be dry enough.
Press the START/PAUSE button to start the new programme.
Note: In the event of a power cut, turn the power switch off and remove the plug; when the electricity supply returns, press the START/PAUSE button to resume the programme.
10