Indesit IDC 85 S Installation, Where to install the tumble dryer Electrical connections

Page 4

Installation

Where to install the tumble dryer

Electrical connections

EN

• Install the dryer far from gas

 

 

ranges, stoves, radiators or

 

hobs, as flames may damage it.

 

If the dryer is installed below a

 

worktop, ensure there are 10

 

mm between the upper panel of

 

the dryer and any objects

 

above it, and 15 mm between

 

the sides of the machine and

 

the walls or furniture units

 

adjacent to it. This ensures

 

adequate air circulation.

10 mm

15 mm 15 mm

Before plugging the appliance into the socket, check the following:

• Make sure your hands are dry.

• The socket must have an earth connection.

• The socket must be able to withstand the machine’s

maximum power output as indicated on the data plate (see

Description of the tumble dryer).

• The power supply voltage must fall within the values indicated

on the data plate (see Description of the tumble dryer).

• The socket must be compatible with the dryer’s plug.

Should this not be the case, replace the plug or the socket.

￿ Do not use extension cords.

￿ The dryer must not be installed outdoors, even if the space is

sheltered. It can be very dangerous if exposed to rain or storms.

￿ Once installed, the dryer’s electrical wire and plug must

Ventilation

The room must be adequately ventilated while the dryer is running. Make sure that the dryer is installed in a room free of humidity and with adequate air circulation. The flow of air around the dryer is essential to allow water to condense during drying; the dryer will not function properly if it is placed in an enclosed space or inside a cabinet.

￿Some condensation may form if the dryer is used in a small or cold room.

￿We do not recommend that the dryer is installed in a cupboard but the dryer must never be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the dryer door.

Water drain

If your dryer is installed next to a drain the water can be plumbed into this drain. This does away with the need to empty the water container. If the dryer is stacked onto or installed next to a washing machine it can share the same drain. The height of the drain must be less than 3' (1 m) from the bottom of the dryer.

Remove existing hose from position shown in picture A and fit a suitable length of hose and connect as shown in picture B.

￿Make sure that the hose is not squashed or kinked when the dryer is in its final location.

be within reach.

￿ The power cord must not be bent or squashed.

￿ The power cord is supplied fitted with a BS1363 plug

and with a 13 amp BS1362 fuse. If it is necessary to fit a

replacement fuse, it must be a 13 Amp ASTA approved

to BS1362 type. WARNING: The plug must not be used

without a fuse cover. If a replacement fuse holder/cover is

required, it must be of the same colour coding or wording as

shown on the base of the plug.

Replacements are available from authorised dealers.

Moulded plug

Changing the plug

The wires in the power cord are coloured in accordance with the following.

Green and Yellow (Earth)

 

 

13A ASTA approved fuse

wire to terminal marked

 

 

to BS 1362.

“E”, symbol x, or coloured

GREEN &

 

 

green and yellow.

YELLOW

 

 

 

BROWN

13 ampere fuse

 

 

 

 

 

 

 

Brown (live) wire to teminal

Blue (Neutral) wire to

BLUE

CROSS-BAR

marked “L” or coloured

terminal marked ”N” or

 

CORD GRIP

red.

coloured black.

 

 

 

1

2

Picture A

2

1

Less than 1m

Picture B

￿If the plug being replaced is a non-rewirable type, then the cut-off plug must be disposed of safely. DO NOT leave it where it can be inserted into a socket and create a shock hazard.

￿The power cord should be checked periodically and replaced by a cord specially prepared for this dryer and fitted only by authorized technicians (see Service). New or longer power cords are supplied at an extra charge by authorized dealers.

￿The manufacturer denies any responsibility should any of these rules not be followed.

￿If in doubt about any of the above consult a qualified electrician.

Preliminary information

Once the tumble dryer is installed, clean the inside of the drum before operating it and remove any dirt accumulated during transportation.

4

Image 4
Contents Tumble Dryer Important information Filling of the Water ContainerPage Installation Where to install the tumble dryer Electrical connectionsVentilation Preliminary informationDescription of the tumble dryer FeaturesControl panel How to carry out a drying cycle Starting a drying programmeDrying times Drying settingsDrying programmes and options Laundry Sorting laundryCare labels Special itemsGeneral safety SuggestionsInformation on recycling and disposal Saving energy and respecting the environmentCare and maintenance Problem Possible causes / Solutions TroubleshootingAssistance Centre see Assistance Spare parts AssistanceBefore contacting the Technical Assistance EN Centre Months Parts and Labour Guarantee GuaranteeReplacement of any removable parts made of glass or plastic Essential Contact Information After Sales ServiceRecycling & Disposal Information Page 195083886.01

IDC 85, IDC 85 S specifications

The Indesit IDC 85 S is a condenser tumble dryer designed to provide efficient drying solutions for households. Known for its reliability and user-friendly features, it is a popular choice among consumers seeking a balance between performance and convenience.

One of the standout features of the Indesit IDC 85 S is its 8 kg drum capacity. This spacious drum allows users to dry larger loads in a single cycle, making it ideal for families or those with frequent laundry needs. Coupled with a range of drying programs, the IDC 85 S ensures that clothes are treated with care while achieving excellent drying results.

The dryer boasts multiple drying cycles tailored to different fabric types. With dedicated settings for cottons, synthetics, and delicate items, users can select the ideal program for their laundry, which helps to prevent over-drying and damage to garments. In addition, the rapid drying option is particularly useful for those in need of quick turnaround times, enabling fresh clothing to be available in less time.

Energy efficiency is another key aspect of the Indesit IDC 85 S. With an average energy rating, this dryer incorporates modern technologies that help reduce energy consumption, ultimately leading to cost savings on utility bills. Moreover, the condenser function eliminates the need for external venting; instead, moisture is collected in a built-in tank, which can be easily emptied after use.

The appliance features an easy-to-read LED display that provides users with information about the cycle status and remaining time. The intuitive control panel allows users to customize settings effortlessly, making it user-friendly for all household members.

Safety and maintenance have also been considered in the design of the Indesit IDC 85 S. It is equipped with a filter that is both easy to clean and maintain, ensuring optimal performance over time. Additionally, the dryer includes a child lock feature, promoting safety by preventing accidental operation.

Overall, the Indesit IDC 85 S combines practicality with versatility, making it a reliable dryer for everyday use. With its spacious capacity, energy-efficient operation, and range of specialized programs, it stands out as a competent appliance that meets the demands of modern laundry needs.