Replacing the fuse, Removing the plug | Indesit IWB 5113 specs

Connecting the drain hose

	• the supply voltage is included within the values indica	GB
	ted on the Technical details table (see page 5);	GB
	ted on the Technical details table (see page 5);

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

•the socket is compatible with the washing machine’s plug. If this is not the case, replace the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under- sink trap. Before connec- ting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is place over the edge of a basin or sink be sure the free end of the hose should not be underwa- ter.

WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through parti- tions, units etc., please ensure that either:

the plug is replaced by a fused 13 ampere re-wearable plug bearing the BSI mark of approval.

!We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 in- ches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the ap- plicable law;

•the socket is able to sustain the appliance’s maximum power load indicated in the Technical details table (see page 5);

or:

the mains cable is wired directly into a 13 amp cable out- let, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow Earth

Blue Neutral

Brown Live

IWB 5113 specifications

The Indesit IWB 5113 is a front-loading washing machine that epitomizes efficiency and reliability, making it a popular choice for households seeking an effective laundry solution. With its sleek design and user-friendly interface, this appliance seamlessly blends functionality with aesthetic appeal, catering to modern living.

One of the standout features of the IWB 5113 is its generous 5 kg capacity, which is ideal for small to medium-sized families. This capacity allows users to wash larger loads, ultimately reducing the number of cycles needed, saving both time and energy. The washing machine offers a maximum spin speed of 1000 RPM, ensuring that clothes come out drier, thus minimizing drying time.

Indesit has integrated several advanced washing programs into the IWB 5113, ensuring that it meets a wide range of laundry needs. These include specialized cycles for cotton, synthetics, and delicate fabrics. Additionally, there is a dedicated program for cleaning sportswear, which requires a different approach to remove sweat and stains effectively.

The IWB 5113 is equipped with the innovative Push & Wash feature, a unique technology designed to simplify the laundry process. With just a push of a button, users can initiate a 30-minute wash cycle at 30°C, perfect for when you're in a rush or need to freshen up a lightly soiled load. This feature not only offers convenience but also contributes to energy savings.

Energy efficiency is another highlight of the Indesit IWB 5113, as it is rated a class C for energy efficiency, a significant improvement over older models, helping users to lower their electricity bills without compromising on performance. The machine also boasts a range of programs that optimize water and energy usage, ensuring that every load is washed in the most eco-friendly manner possible.

In terms of safety, the IWB 5113 is designed with an out-of-balance load detection system, which helps maintain stability during the spin cycle, preventing excessive noise and vibration. The delay start function allows users to schedule washes at their convenience, accommodating busy lifestyles.

In conclusion, the Indesit IWB 5113 washing machine is a robust and versatile appliance that meets the demands of everyday laundry tasks. With its range of features, advanced technologies, and energy efficiency, it provides an excellent balance of performance, convenience, and ecological responsibility, making it a great choice for the modern home.