Description of the washing machine and starting a wash cycle
GB
Control panel
ON/OFF button
WASH CYCLE PROGRESS/
DELAY TIMER indicator lights
FUNCTION |
|
| START/PAUSE |
buttons with |
|
| |
|
| button with | |
indicator lights |
|
| |
|
| indicator light | |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Detergent dispenser drawer
WASH CYCLE
knob
Detergent dispenser drawer: used to dispense detergents and washing additives (see “Detergents and laundry”).
ON/OFF button: switches the washing machine on and off.
WASH CYCLE knob: programmes the wash cycles. Du- ring the wash cycle, the knob does not move.
FUNCTION buttons with indicator light: used to select the available functions. The indicator light corresponding to the selected function will remain lit.
TEMPERATURE knob: sets the temperature or the cold wash cycle (see “Personalisation”).
SPIN SPEED knob: sets the spin speed or exclude the spin cycle completely (see “Personalisation”).
WASH CYCLE PROGRESS/DELAY TIMER indicator lights: used to monitor the progress of the wash cycle. The illuminated indicator light shows which phase is in progress.
If the Delay Timer function has been set, the time remai- ning until the wash cycle starts will be indicated (see next page).
TEMPERATURE |
|
|
|
|
|
| |
| DOOR LOCKED | ||
knob |
| ||
SPIN SPEED | indicator light | ||
|
| ||
| knob |
|
|
DOOR LOCKED indicator light: indicates whether the door may be opened or not (see next page).
START/PAUSE button with indicator light: starts or tem- porarily interrupts the wash cycles.
N.B. To pause the wash cycle in progress, press this button; the corresponding indicator light will flash orange, while the indicator light for the current wash cycle phase will remain lit in a fixed manner. If the DOOR LOCKED indicator light is switched off, the door may be opened.
To start the wash cycle from the point at which it was inter- rupted, press this button again.
Standby mode
This washing machine, in compliance with new energy sa- ving regulations, is fitted with an automatic standby system which is enabled after about 30 minutes if no activity is detected. Press the
Consumption in
Consumption in
8