Connecting the drain hose

• the supply voltage is included within the values i

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

ndicated on the Technical details table	GB
ndicated on the Technical details table
(see page 5);

•the socket is compatible with the washing machine's plug. If this is not the case, replace the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under-sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is place over the edge of a basin or sink be sure the free end of the hose should not be underwater.

WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through partitions, units etc., please ensure that either:

We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the applicable law;

•the socket is able to sustain the appliance's maximum power load indicated in the Technical details table (see page 5);

the plug is replaced by a fused 13 ampere re- wearable plug bearing the BSI mark of approval. or:

the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow Earth

BlueNeutral

Brown Live

IWDE 7145 specifications

The Indesit IWDE 7145 is a versatile and efficient washer dryer that combines robust washing capabilities with reliable drying performance, making it an ideal solution for households with limited space. This model is designed to meet the needs of busy families, offering a variety of features and technologies that enhance laundry care and convenience.

One of the standout features of the IWDE 7145 is its generous capacity, which allows users to wash up to 7 kg of laundry, and dry up to 5 kg. This makes it suitable for handling larger loads, reducing the number of cycles needed, and saving valuable time. The model boasts a range of wash programs, including specialized options for cottons, synthetics, and delicate fabrics, ensuring optimal results for different types of garments.

The IWDE 7145 incorporates Indesit's innovative Push & Wash technology, which simplifies the washing process. By pushing a single button, users can start a 30-minute wash cycle at 30 degrees Celsius, perfect for freshening up lightly soiled clothes in a hurry. This feature, paired with a rapid wash program, provides flexibility for busy lifestyles, making laundry day more manageable.

In terms of drying capabilities, the Indesit IWDE 7145 features a range of drying programs tailored to different fabric types, ensuring that items come out perfectly dry without the risk of shrinkage or damage. The model uses a sensor drying system that automatically stops the drying cycle when the desired level of dryness is achieved, enhancing energy efficiency and protecting clothes from over-drying.

Energy efficiency is another key characteristic of this washer dryer; it is rated at in terms of energy, which helps to keep electricity bills manageable while also being environmentally friendly. The spin speed is adjustable up to 1400 RPM, effectively extracting excess water from clothes before the drying cycle, allowing for faster drying times.

Overall, the Indesit IWDE 7145 washer dryer blends practicality with performance. Its user-friendly features, impressive capacity, and energy-saving technologies make it a great addition to any home. Whether tackling everyday laundry or delicate items, this appliance is engineered to provide reliable results while simplifying the laundry process. It stands as a testament to Indesit's commitment to creating efficient and practical home appliances for the modern user.