Indesit IWSD 51251 manual Indicator lights, Starting a wash cycle

Page 9

Indicator lights

The indicator lights provide important information. This is what they can tell you:

Wash cycle phase indicator lights

Once the desired wash cycle has been selected and has begun, the indicator lights switch on one by one to indicate which phase of the cycle is currently in progress.

Wash

Rinse

Spin

Drain

End of wash cycle

Function buttons and corresponding indicator lights

When a function is selected, the corresponding indicator light will illuminate.

If the selected function is not compatible with the program- med wash cycle, the corresponding indicator light will flash and the function will not be activated.

If the selected function is not compatible with another function which has been selected previously, the indicator light corresponding to the first function selected will

flash and only the second function will be activated; the indicator light corresponding to the enabled option will

remain lit.

Door locked indicator light

GB

When the indicator light is on, the porthole door is locked

 

to prevent it from being opened; make sure the indicator

 

light is off before opening the door (wait approximately 3

 

minutes). To open the door during a running wash cycle,

 

press the START/PAUSE button; the door may be opened

 

once the DOOR LOCKED indicator light turns off.

 

Starting a wash cycle

1.Switch the washing machine on by pressing the ON/OFF button. All indicator lights will switch on for a few seconds, then they will switch off and the START/PAUSE indicator light will pulse.

2.Load the laundry and close the door.

3.Set the WASH CYCLE knob to the desired programme.

4.Set the washing temperature (see “Personalisation”).

5.Set the spin speed (see “Personalisation”).

6.Measure out the detergent and washing additives (see “Detergents and laundry”).

7.Select the desired functions.

8.Start the wash cycle by pressing the START/PAUSE button and the corresponding indicator light will remain lit in a fixed manner, in green. To cancel the set wash cycle, pause the machine by pressing the START/PAUSE button and select a new cycle.

9.At the end of the wash cycle the indicator light will switch on. The door can be opened once the DOOR LOCK indi- cator light turns off. Take out your laundry and leave the appliance door ajar to make sure the drum dries completely. Switch the washing machine off by pressing the ON/OFF button.

9

Image 9
Contents Washing Machine Instructions for useInstallation leaflet InstallationUnpacking and levelling Electric and water connectionsReplacing the fuse Removing the plugDisposing of the plug Disposing of the appliance First wash cycleMaximum pressure Technical dataCare and maintenance General safety Precautions and tipsThis appliance can be used by children aged DisposalDescription of the washing machine and starting a wash cycle Starting a wash cycle Indicator lightsTable of wash cycles Wash cyclesSetting the spin speed Setting the temperaturePersonalisation FunctionsDetergent dispenser drawer Detergents and laundryGarments requiring special care Preparing the laundryTroubleshooting ProblemPossible causes / Solutions Etc. Try the programme again using a different load Assistance 195111340.01 After Sales ServiceEssential Contact Information Recycling & Disposal Information