As the colours of the wires in the lead may not
GB | correspond with the coloured markings identifyng | ||
| |||
| the terminals in your plug, proceed as follows: | ||
| Connect Green & Yellow wire to terminal marked E | ||
| or | or coloured Green or Green & Yellow. | |
| Connect Brown wire to terminal marked L or | ||
| coloured Red. |
| |
| Connect Blue wire to terminal marked N or coloured | ||
| Black. |
|
|
| If a 13 amp plug (BS 1363) is used it must be fitted | ||
| with a |
|
|
| 13 amp fuse, either in the plug or adaptor or at the | ||
| distribution board. |
| |
| If you are in any doubt the electrical supply to your | ||
| machine, consult a qualified electrician before use. | ||
| How to connect an alternative plug: | ||
| The wires in this mains lead are coloured in | ||
| accordance with the following code: | ||
| BLUE |
| NEUTRAL (N) |
| BROWN | LIVE (L) | |
| GREEN & YELLOW | EARTH (E) | |
Disposing of the appliance:
When disposing of the appliance please remove the plug by cutting the mains cable as close as possible to the plug body and dispose of it as described above.
GREEN &
YELLOW
BROWN | 13 ampere fuse |
| |
BLUE | |
| CORD GRIP |
Warning! The company denies all liability if and when these norms are not respected.
The first wash cycle
Once the appliance has been installed, and before you use it for the first time, run a wash cycle with detergent and no laundry, setting the 90°C programme without a
The washing machine should not be installed in an outdoor environment, not even when the area is sheltered, because it may be very dangerous to leave it exposed to rain and thunderstorms.
When the washing machine is installed, the mains socket must be within easy reach.
Do not use extensions or multiple sockets.
The power supply cable must never be bent or dangerously compressed.
The power supply cable must only be replaced by an authorised serviceman.
4