Connecting the drain hose

• the supply voltage is included within the values i

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

ndicated on the Technical details table	GB
ndicated on the Technical details table
(see page 5);

•the socket is compatible with the washing machine's plug. If this is not the case, replace the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under-sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is place over the edge of a basin or sink be sure the free end of the hose should not be underwater.

WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through partitions, units etc., please ensure that either:

We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the applicable law;

•the socket is able to sustain the appliance's maximum power load indicated in the Technical details table (see page 5);

the plug is replaced by a fused 13 ampere re- wearable plug bearing the BSI mark of approval. or:

the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow Earth

BlueNeutral

Brown Live

IWE 7145 S specifications

The Indesit IWE 7145 S is a highly efficient and practical washing machine that caters to diverse laundry needs with its array of features and technologies. Designed to provide optimal performance while ensuring energy conservation, this model combines functionality with modern aesthetics.

One of the standout features of the Indesit IWE 7145 S is its 7 kg capacity, which makes it suitable for medium-sized households. This capacity allows users to wash a significant amount of laundry in a single load, helping to save time and energy. The machine is equipped with multiple washing programs, allowing for tailored cycles based on the type and intensity of the fabrics being washed. From delicate woolens to robust cottons, users can select the appropriate setting to ensure effective cleaning without damaging the clothes.

The Indesit IWE 7145 S is designed with a spin speed of up to 1400 RPM, ensuring that water is efficiently extracted from the laundry, which reduces drying time significantly. This feature is particularly beneficial for those living in humid climates or with limited drying options. Moreover, this washing machine boasts a high energy efficiency rating, making it an environmentally friendly choice that helps lower electricity bills.

One of the most innovative technologies integrated into the Indesit IWE 7145 S is the Push&Wash feature. This allows users to initiate a washing cycle simply by pressing a single button, making the operation incredibly straightforward. The 30-minute quick wash program is another highlight, making it ideal for those who need fresh clothes in a hurry.

In terms of user experience, the Indesit IWE 7145 S comes with a clear LED display and intuitive controls, allowing for easy program selection and monitoring of the wash cycle. Its attractive design features a sleek silver finish, which complements any modern laundry room.

Additionally, the machine includes a variety of safety features, such as a child lock and overflow protection, providing peace of mind for families. The Indesit IWE 7145 S is a dependable choice for anyone looking for a versatile and efficient washing machine that seamlessly fits into their daily routine. With its combination of advanced technology and user-friendly design, it stands out in the crowded market of home appliances.