JVC LVT1504-005B manual Speaker layout, Connecting a TV, Jacks

Page 16

Connections

Do not connect the power cord until all other connections have been made.

Speaker layout

To obtain the best possible sound from this system, you need to place all the speakers except the subwoofer at the same distance from the listening position.

 

Center speaker

Front left

Front right

speaker

speaker

Powered subwoofer

Surround left

Surround right

speaker

speaker

If your speakers cannot be placed at the same distance from the listening position

You can adjust the delay time of the speakers. See “Delay menu (DELAY)” on page 38.

NOTE

•Place the satellite speakers on a flat and level surface.

•The front and center speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, they may cause color distortions. So, pay attention to the following when installing the speakers.

– When placing the speakers near a TV set, turn off the TV’s main

power switch or unplug it before installing the speakers. Then wait at least 30 minutes before turning on the TV’s main power switch again.

Some TVs may still be affected even though you have followed the above. If this happens, move the speakers away from the TV.

•The surround speakers are not magnetically shielded.

If they are located nearby the TV or monitor, it will probably cause color distortion on the screen. To avoid this, do not place the speakers nearby the TV or monitor.

•Be sure to place the powered subwoofer to the TV’s right. If you place the powered subwoofer to the TV’s left, keep sufficient distance between them to prevent the TV screen from appearing mottled.

Connecting a TV

•You can get better picture quality in the order — Component video > S-video > Composite video.

•Distortion of picture may occur when connecting to the TV via a VCR, or to a TV with a built-in VCR.

•You need to set “MONITOR TYPE” in the PICTURE menu correctly according to the aspect ratio of your TV. (See page 38.)

7To connect a TV equipped with the component video input

jacks

If your TV supports progressive video input, you can enjoy a high quality picture by setting the progressive scan mode to active. (See page 20.)

Center unit

TV

To component video input

Component video cord (not supplied)

NOTE

•If the component video input jacks of your TV are of the BNC type, use a plug adapter (not supplied) to convert the pin plugs to BNC plugs.

•The component video signals can be output only when you select DVD or USB MEMORY as the source to play. (See page 19.)

7To connect a TV equipped with the composite or S-video jacks

Center unit

Composite video cord (supplied)

or

 

S-video cord

 

(not supplied)

 

Align the 5 marks.

To composite

To S-video input

 

video input

 

TV

NOTE

• Select the appropriate scan mode according to your TV. (See page 20.)

13

Page 15 Page 17
Image 16
Page 15 Page 17
Contents TH-C90 Important for Laser Products Class 1 Laser ProductXV-THC90/XV-THC60 Table of contents Supplied accessories Safety precautionsIntroduction Important cautionsAbout discs Playable disc typesUnplayable discs Region code of DVD VideoPlayable file types About discsDescription of parts and controls Front panel center unitRear panel center unit Display windowSetting the Voltage Selector Description of parts and controls Powered subwooferSP-PWC90 SP-PWC60 SP-PWC20 Putting batteries in the remote control Description of parts and controls Remote controlOperating the system from the remote control Connecting the FM and AM antennas ConnectionsAM loop antenna FM antennaConnections Assembling the front speakers TH-C90When assembling a speaker without stand Connecting the center speaker TH-C60Assembling the front and surround speakers TH-C60 Connecting the satellite speakers to the subwoofer TH-C90 Precautions for daily useBefore connecting the speaker cords Twist and pull the insulation coat off and removeConnecting a TV Speaker layoutJacks To connect a TV equipped with the component video inputConnecting the powered subwoofer Connecting to an analog componentConnecting a cassette recorder Only for TH-C90 Connecting to a digital componentSP-PWC90 Operating external components with the remote control Operating the TVPress Enter Release F TVOperating the DBS tuner or Catv converter Operating the VCRManufacturer’s code 2 digits Release F VCR/DBSBasic operations Turning the system on/offPress Faudio Press FAdjusting the volume Volume Adjusting the brightness of the indications DimmerSelecting the source to play Turning off the sound temporarily MutingAdjusting the sound Sleep Timer SleepChanging the scan mode Playback Basic playbackOn-screen guide icons PlaybackPlayback information on the display window One Touch Replay Press y orPress and hold x or Disc information on the display windowSkip to the beginning of a desired selection Skipping at about 5-minute intervalsAbout the play mode on a DVD VR disc Playing back a bonus groupSelect the bonus group Press Cursor Y/5 to select the desired Title/playlistUsing the surround mode Advanced operationsAuto Surround Auto SUR Dolby SurroundUsing the on-screen bar Selecting the surround modeAdvanced operations Showing the on-screen barChanging the time information Press on Screen twicePress Cursor 3/2 to highlight Desired informationLocating a desired scene using a VCD/SVCD menu with PBC Locating a desired chapter/track using the on- screen barUsing the file control display To cancel a misentryLocating a desired position by specifying the time Beginning of the discSelecting a view angle Resume PlaybackSelecting the subtitle Selecting the audio Special picture playbackFrame-by-frame playback Playing back in slow-motionSelecting browsable still picture recorded on DVD Audio Changing the VFP settingZooming Press Play Mode Program PlaybackPress 3 play button Repeatedly until programRandom Playback Repeat PlaybackRepeating the current selection or all discs Press RepeatSetting the sound balance Tray lockRepeating a desired part A-B Repeat On the center unit onlyUsing the setup menus Setting DVD preferencesMenu description Speaker setting menu SPK. Setting Setting DVD preferences Picture menu PictureAudio menu Audio Setting the AM tuner interval spacing Manual tuningSetting DVD preferences Other setting menu OthersPreset tuning Selecting the FM reception modeReducing the noise of AM broadcast Tuner operationsKaraoke operations Basic Karaoke operationsReserving songs Selecting audioKaraoke operations Selecting audio channels AudioAdding an echo effect to your voice Shifting the pitch of the playback soundMaintenance TroubleshootingCleaning the system ReferencesSpecifications ReferencesSatellite Speakers SP-XTHC60 Satellite Speakers SP-XTHC90Satellite Speakers SP-XTHC20 Mains AC Line Instruction

LVT1504-005B specifications

The JVC LVT1504-005B is a cutting-edge audio speaker set that stands out in the competitive landscape of home audio technology. Designed to elevate your listening experience, it combines advanced engineering and sleek aesthetics to deliver outstanding sound quality.

One of the most notable features of the JVC LVT1504-005B is its sophisticated sound reproduction capabilities. It is equipped with high-performance drivers that produce a well-rounded sound profile, ensuring that both high and low frequencies are rendered with clarity. This provides an immersive audio experience, whether you are watching movies, listening to music, or playing video games.

The speaker set integrates advanced technologies such as Dolby Digital and DTS support, allowing for exceptional surround sound experiences. With these technologies, the JVC LVT1504-005B is capable of creating a three-dimensional soundstage that brings content to life. Whether you’re in the middle of an action-packed movie or enjoying a live concert recording, the depth and clarity of sound are truly impressive.

In terms of design, the JVC LVT1504-005B features a modern and elegant look that can seamlessly blend into any home décor. Its compact form factor allows for versatile placement options, making it suitable for a variety of spaces. The build quality is robust, ensuring durability while maintaining an aesthetic appeal.

The connectivity options are also noteworthy in this speaker system. The JVC LVT1504-005B comes with multiple input options, including Bluetooth capability for wireless streaming. This feature enables users to easily connect their smartphones, tablets, or other devices to enjoy their favorite music without the hassle of wires.

Moreover, the speaker set is designed to be user-friendly, with intuitive controls that make adjusting settings convenient. The inclusion of remote control functionality adds to its ease of use, allowing you to manage your sound experience from a distance.

In summary, the JVC LVT1504-005B speaker set brings together advanced sound technologies, elegant design, and versatile connectivity to enhance your audio experience at home. Whether you are a casual listener or an audiophile, this speaker system is poised to deliver performance and aesthetics that meet your audio needs. With its impressive range of features, it represents a strong choice for those seeking quality sound in their living spaces.
Top Page Image Contents