Hotpoint WF620 manual Options, Reduce Creases

Page 7

STEP 6

Options

 

 

Button Selection: To select an option, press the button and you will see a light come on alongside the button. Press again to cancel, and the light will go out.

NOTE: If the option selected is not available with the programme, the light will flash briefly.

Reduce Creases

Reduces wash action and spin speed, meaning less ironing for delicate clothes.

This option is only available with programmes C, E, G, H and Rinse & Spin.

Time Saver

Saves up to a third on the programme time.

This option is only available with programmes B, D, G and H.

Mini Load...

For washing a smaller load.

In addition to reducing actual washing time, this option will reduce water and energy consumption by up to 50%.

Note: You can reduce the amount of detergent you use with this wash.

This option is not available with programmes A, F, J, K, L, M and Spin Only.

Rinse Hold

Clothes will be held in the final rinse water, keeping them fresh until you are ready to complete the programme.

Complete the final spin by pressing the Rinse Hold button when the light is flashing.

This is not available with programmes A, J, L M, Rinse & Spin or Spin Only.

Time Delay...

(Models WF645, WF640 and WF630 only)

This option can delay the start of your wash programme by up to 24 hours. The display will show the delay you have chosen. Each press of the option button will add a delay of one hour. If you press after 24 shows on the display the machine will reset the time delay and show ‘OFF’ in the display, any press after this will start counting again from one hour

Extra Rinse...

(Model WF620 only)

For large wash loads and items for young children or people with sensitive skin.

This option adds a rinse.

This is not available with programmes A, J, K, L, M or Spin Only.

Variable Spin Speed

This allows you to reduce the spin speed below the maximum for the programme you have chosen.

Each press of the button will reduce the spin speed to the next lower band. The new spin speed will be shown in the display.

If you press again after ‘OFF’ has been displayed, the machine will revert to the original higher spin speed.

WARNINGS:

● DO NOT allow

● DO NOT overload

● During the wash

children to play

the appliance!

cycle, remember

with the appliance

It may damage

that the door

or tamper with the

the laundry and

glass may

controls.

reduce the

become hot to

 

quality of the

the touch.

 

wash.

 

Variable Temperature

This allows you to reduce the wash temperature below the maximum for the programme you have chosen.

Each press of the button will reduce the wash temperature by 5˚C. The new wash temperature will be shown in the display. If you press again after ‘OFF’ has been displayed, the machine will revert to the original higher wash temperature.

● DO NOT open the

● DO NOT try to

● If you stop a programme

dispenser drawer

open the door

part way through a wash

during any

when the ‘Door

or there is a power cut,

programme.

Locked’ indicator

take care when opening

 

light is on.

the door, the machine

 

 

may contain hot water.

Image 7
Contents Step Electricity Supply Step Step Programme Selector Dial StepStep Using your MachineReduce Creases OptionsTypical Wash Programme Press the ‘Start/Cancel’ button to start the new programmeStep Getting to Know your Appliance Hotpoint guarantee