Indesit IWSC 5125 manual Installation, Unpacking and levelling, See figure

Page 2

Installation

GB

! This instruction manual should be kept in a safe place for

future reference. If the washing machine is sold, transferred

 

 

or moved, make sure that the instruction manual remains

 

with the machine so that the new owner is able to familiari-

 

se himself/herself with its operation and features.

 

! Read these instructions carefully: they contain vital infor-

 

mation relating to the safe installation and operation of the

 

appliance.

 

Unpacking and levelling

 

Unpacking

 

1. Remove the washing machine from its packaging.

 

2. Make sure that the washing machine has not been

 

damaged during the transportation process. If it has been

 

damaged, contact the retailer and do not proceed any

 

further with the installation process.

 

3. Remove the 3 protective

 

screws (used during tran-

 

sportation) and the rubber

 

washer with the correspon-

 

ding spacer, located on the

 

rear part of the appliance

 

(see figure).

4.Close off the holes using the plastic plugs provided.

5.Keep all the parts in a safe place: you will need them again if the washing machine needs to be moved to ano- ther location.

!Packaging materials should not be used as toys for children.

Levelling

1. Install the washing ma- chine on a flat sturdy floor, without resting it up against walls, furniture cabinets or anything else.

2. If the floor is not perfectly level, compensate for any unevenness by tightening or loosening the adjustable front feet (see figure); the

angle of inclination, measured in relation to the worktop, must not exceed 2°.

Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating. If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine.

Connecting the electricity and water supplies

Connecting the water inlet hose

1. Connect the supply pipe by screwing it to a cold water tab using a ¾ gas threaded connection (see figure).

Before performing the con- nection, allow the water to run freely until it is perfectly clear.

2. Connect the inlet hose to the washing machine by screwing it onto the corre- sponding water inlet of the appliance, which is situa- ted on the top right-hand side of the rear part of the appliance (see figure).

3. Make sure that the hose is not folded over or bent.

!The water pressure at the tap must fall within the values indicated in the Technical details table (see next page).

!If the inlet hose is not long enough, contact a specialised shop or an authorised technician.

!Never use second-hand hoses.

!Use the ones supplied with the machine.

2

Image 2
Contents Instructions for use Washing MachineUnpacking and levelling InstallationConnecting the electricity and water supplies See figureDisposing of the plug Replacing the fuseRemoving the plug First wash cycle Disposing of the applianceTechnical data Control panel Detergent dispenser drawerSet the spin speed see Personalisation Indicator lightsStarting a wash cycle Wash cycles Table of wash cyclesTable of wash cycles PersonalisationFunctions Set for each wash cycleLoad balancing system Detergents and laundryDetergent dispenser drawer Preparing the laundryDisposal Precautions and tipsGeneral safety Care and maintenance Troubleshooting Problem Possible causes / SolutionsMachine is noisy Assistance Essential Contact Information After Sales Service195082972.01 Recycling & Disposal Information
Related manuals
Manual 16 pages 46.44 Kb

IWSC 5125 specifications

The Indesit IWSC 5125 is a versatile and efficient washing machine designed to meet the needs of modern households. Offering a perfect blend of functionality and user-friendliness, this model is ideal for those seeking an effective laundry solution without compromising on quality.

One of the standout features of the IWSC 5125 is its substantial capacity, accommodating up to 5 kilograms of laundry. This makes it suitable for small to medium-sized families, allowing users to wash a variety of garments in one cycle. The appliance operates at a maximum spin speed of 1200 RPM, which ensures clothes come out drier and requires less time in the tumble dryer, contributing to energy savings.

Energy efficiency is a core characteristic of the Indesit IWSC 5125, with a notable A+ rating. This means it consumes less energy compared to lower-rated models, making it an environmentally friendly choice that can help reduce utility bills.

This washing machine is equipped with several wash programs tailored for different fabric types and cleaning needs. Among the key offerings are programs for cotton, synthetic materials, and delicate fabrics, ensuring optimal care for every item. The rapid wash function allows users to complete shorter cycles in just 30 minutes, perfect for those in a hurry who need clean clothes in no time.

Additionally, the IWSC 5125 incorporates Indesit’s innovative Push and Wash technology. With just a single push of a button, users can initiate a 50-minute wash cycle for cotton and synthetic garments at a temperature of 30°C. This feature is particularly beneficial for busy individuals who appreciate efficiency without sacrificing cleanliness.

The machine also boasts a delay timer, which grants users the flexibility to schedule washes at their convenience. This is especially useful for taking advantage of off-peak energy tariffs or ensuring laundry is complete just when it’s needed.

Safety and reliability are prioritized with the inclusion of features such as child lock and overload protection. These elements ensure peace of mind during operation, particularly in households with young children.

In sum, the Indesit IWSC 5125 stands out for its capacity, energy efficiency, and range of practical technologies that cater to the diverse needs of its users. With its modern features and thoughtful design, this washing machine continues to make laundry chores a breeze.