Care and maintenance

		Cutting off the water and electri-
	GB	Cutting off the water and electri-
	GB	city supplies
		city supplies
		• Turn off the water tap after every wash cycle.
		This will limit wear on the hydraulic system in-
		side the washing machine and help to prevent
		leaks.
		• Unplug the washing machine when cleaning
		it and during all maintenance work.
		Cleaning the washing machine
		The outer parts and rubber components of the
		appliance can be cleaned using a soft cloth
		soaked in lukewarm soapy water. Do not use
		solvents or abrasives.
		Cleaning the detergent dispenser
		drawer

2. unscrew the lid by rotating it anti- clockwise (see figu- re): a little water may trickle out. This is perfectly normal;

3.clean the inside thoroughly;

4.screw the lid back on;

5.reposition the panel, making sure the hooks are securely in place before you push it onto the appliance.

Remove the dispenser by raising it and pul- ling it out (see figure). Wash it under running water; this operation should be repeated frequently.

Checking the water inlet hose

Check the inlet hose at least once a year. If there are any cracks, it should be replaced immediately: during the wash cycles, water pressure is very strong and a cracked hose could easily split open.

!Never use second-hand hoses.

Caring for the door and drum of your appliance

•Always leave the porthole door ajar in order to prevent unpleasant odours from forming.

Cleaning the pump

The washing machine is fitted with a self-clea- ning pump which does not require any mainte- nance. Sometimes, small items (such as coins or buttons) may fall into the pre-chamber which protects the pump, situated in its bottom part.

!Make sure the wash cycle has finished and unplug the appliance.

To access the pre-chamber:

1. using a screwdri- ver, remove the cover panel on the lower

front part of the wa- shing machine (see

figure);