Hotpoint AQ9D 692 S manual Description of the machine

Page 6

Description of the machine

EN

CONTROL

 

PANEL

 

PORTHOLE DOOR

 

PORTHOLE DOOR

 

HANDLE

KICK STRIP

ADJUSTABLE FEET

PORTHOLE DOOR

Always use the handle to open the porthole door (see figure).

DETERGENT DISPENSER DRAWER

The detergent dispenser drawer is located inside the machine and can be accessed by opening the door.

For more information on detergent measures, please refer to the chapter entitled “Detergents and laundry”.

 

1. pre-wash compartment:

 

use powder detergent.

 

2. main wash compartment:

1

use powder or liquid

2

detergent. If using the

latter type of detergent, we

 

 

recommend it is poured

 

into the drawer immediately

 

before you start the washing

 

machine.

washing additives compartment: for fabric softener or liquid additives. We recommend that the maximum level indicated by the grille is not exceeded, and that concentrated fabric softeners are diluted.

TOUCH CONTROL PANEL

To adjust the settings, gently press the icon inside the sensitive (touch control) area as illustrated in the figure.

Standby mode

This washing machine, in compliance with new energy saving regulations, is fitted with an automatic standby system which is enabled after about 30 minutes if no activity is detected. Press the ON-OFF button briefly and wait for the machine to start up again.

6

Image 6
Contents Instructions for installation and use Washing MachineInstallation Connecting the electricity and water suppliesUnpacking and levelling Green & Yellow Earth Blue Following code Blue Neutral N Brown Live L Green & Yellow Earth ETechnical data Description of the machine Selector knob Timer buttonTouch control panel START/PAUSE buttonPressed again, the maximum values are restored Set a Delay TimerRunning a wash cycle Wash options Wash cycles and optionsTable of wash cycles Easy IronPreparing the laundry Detergents and laundryEN Detergent Washing recommendationsDisposal Precautions and tipsGeneral safety European Directive 2002/96/EC relating to WasteCare and maintenance Trouble shooting Problem Possible causes / SolutionsEtc. Try the programme again using a different load GuaranteeEN AssistanceAfter Sales Service 195084907.01