Whirlpool W10097005A SP, W10096986A Select the desired cycle, Set cycle settings and options

3. Select the desired cycle

		Damp Tumble		20
TIMED	40	Dry	Press		Cool Down
DRY	50				OFF	ACCUDRY
60						sensor dryer
						Jeans
70						Very Dry
Heavy
Dry						ENERGY PREFERRED
OFF						Delicate
						Less Dry
		WP_WEGD4900XW				Cool Down

OFF

WRINKLE

SHIELD

Select the desired cycle for your load. See the Cycle Guide for more information about each cycle.

ACCUDRY™/AUTOMATIC DRY Cycles

You can select a different dryness level, depending on your load, by turning the knob to dryness level.

Selecting Very Dry, ENERGY PREFERRED, or Less Dry automatically adjusts the dryness level at which the dryer will shut off. Once a dry level is set, it cannot be changed without stopping the cycle.

ACCUDRY™/AUTOMATIC DRY cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting.

NOTE: Very Dry removes more load moisture. ENERGY PREFERRED is used for a starting point for ACCUDRY™ cycles. Choose ENERGY PREFERRED for optimal energy savings. Less Dry removes less moisture and used for loads you may want to put on a hanger to complete drying.

4. Set cycle settings and options

w

M

e

d

o

L

its

ca

i

n

s

m

k

u

￿

O

al

n

l

y

H

O

n

a

t

h i

e

e g

O

h

vh

r o

y

i n

A

TEMPERATURE	WRINKLE SHIELD
fabric

Select cycle settings and options by turning the knob to the desired position.

NOTE: Not all options and settings are available with all cycles.

TEMPERATURE / Fabric

Turn the TEMPERATURE / Fabric knob to change the drying temperature setting. See “Setting the Drying Temperature”.

Wrinkle Shield™ feature (on some models)

nGet up to 40 minutes of heat-free, periodic tumbling at the end of a cycle. Turn the WRINKLE SHIELD™ knob to select

ON or OFF at any time before the cycle has ended.

5. Select End of Cycle Signal (if desired)

				y
			f C cle		Si
	d	o
					g
n						n
E							a
	￿				O		l
O						n

PUSH TO START

Turn the END OF CYCLE SIGNAL knob to select the

desired setting (On or Off). The End of Cycle Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling.

NOTE: When the Wrinkle Shield™ setting is selected

and the End of Cycle Signal is on, the tone will sound every 5 minutes until the clothes are removed, or the Wrinkle Shield™ setting ends.

6. Press PUSH to START to begin cycle

			f Cycle	Si
	d	o
				g
n					n
E						a
	￿			O		l
O					n

PUSH TO START

Push and hold the PUSH to START knob to begin the cycle.

Promptly remove garments after cycle has completed to reduce wrinkling. Use the Wrinkle Shield™ feature to avoid wrinkling when you are unable to remove a load from the dryer as soon as it stops.

8