STAKINGYOURDRYER(CONT.)
Stoppingandrestartinpyourdryer
You can stop your dryer anytime during a cycle.
To stop your dryer:
Open the dryer door or turn the Cycle Control Knob to off.
NOTE: The Cycle Control Knob should point to an Off area when the dryer is not in use.
To restart your dryer:
Close the door, select a new cycle and temperature (if desired), and push the Start button.
iEWINGMERIGHTMI ANDlWlPERATuRESETTING
The following pages describe the drying cycles on your dryer. The descriptions include suggested temperature settings and drying times for various loads.
cycleandtemperaturetips
0 Make sure you have selected the correct cycle and temperature for your load.
l Dry most loads using the Energy Preferred Automatic Setting (+).
0 Use the Fluff Air cycle, or line dry rubber, plastic, delicate, and
lIf some types of loads in the cycle descriptions on the following pages have more than one suggested temperature setting, choose the lowest setting available on your dryer.
a The last few minutes of all cycles are without heat to make the load cooler to handle.
Dryingtips
0 Always follow care label directions when they are available.
l If you use fabric softener sheets, always use softener sheets that are labeled as dryer safe and follow package instructions carefully.
0 Remove the load from the dryer as soon as tumbling stops to reduce wrinkling. This is especially important for permanent press, knits, and synthetic fabrics.
9