Loading Clothes
Load clothes loosely into the dryer. Do not pack the dryer. Allow space for clothes to tumble freely. The following chart shows examples of balanced loads that would allow for proper tumbling.
Heavy work | 3 pair of pants, 4 pair of jeans, 2 pair of |
clothes | overalls, 3 shirts |
|
|
Delicates | 3 camisoles, 1 robe, 4 slips, |
| 6 undergarments, 2 sets of sleepwear, |
| 1 child’s outfit |
|
|
Towels | 10 bath towels, 10 hand towels, 14 wash |
| cloths, 1 bath mat |
|
|
Mixed Load | 3 double sheets, 4 pillowcases, |
| 8 |
| 8 handkerchiefs |
Drying, Cycle,and Temperature Tips
Select the correct cycle and temperature for your load.
Cool Down tumbles the load without heat during the last few minutes of all cycles to make the load easier to handle.
Drying tips
■Follow care label directions when they are available.
■If you use fabric softener sheets, use only those labeled “dryer safe.” Follow package instructions.
■Remove the load from the dryer as soon as tumbling stops, to reduce wrinkling. This is especially important for permanent press, knits, and synthetic fabrics.
Cycle and temperature tips
■Dry most loads using the Energy Preferred Automatic Setting (*), if available on your dryer.
■Use a High Heat setting for drying heavyweight items such as towels and work clothes.
■Use a Medium Heat setting for drying medium weight items, such as sheets, underwear, permanent press fabrics, and some knits.
■Use a Low Heat setting for drying lightweight items such as lingerie, blouses, dresses, and some knits.
■Use a
■Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions. If you are unsure of the temperature to select for a load, select a lower setting rather than a higher setting.
Cycle Descriptions
This manual covers several different models. Your dryer may vary from the model shown and may not have all of the cycles and features described.
Cycle Control knob
Automatic cycle(s)
Use your Automatic cycle to dry most loads. Your dryer uses either the electronic ACCUDRY™ system or the Automatic Dry control. The control senses the moisture level in the load and shuts off when the load reaches the selected dryness.
On some models
■Automatic Dry (High Heat) and Automatic Dry (Low Heat)
Select the temperature by moving the Cycle Control knob to (High Heat) for bigger or heavier loads or (Low Heat) for smaller or lighter loads.
■Automatic Dry
Select the temperature from the temperature selector based on the fabrics in your load.
■ACCUDRY™ System
Select the temperature from the temperature selector based on the fabrics in your load.
After drying a load in any of the Automatic cycles, check the dryness.
■If the load is drier than you like, select a setting closer to Less Dry the next time you dry a similar load.
■If a load is not as dry as you like, complete drying using a Timed cycle. Select a setting closer to Very Dry the next time you dry a similar load.
NOTE: Drying time varies with an Automatic cycle. The type of fabric, size of the load, and the dryness selected affect drying time. See “Drying, Cycle and Temperature Tips.”
Timed Drying cycle(s)
Use Timed Drying for heavyweight and bulky items, such as bedspreads and work clothes or large loads that require a long drying time. Set the temperature selector, if available, to High Heat.
On some models, you may use the Timed Drying cycle for lightweight items such as lingerie or knits. Set the temperature selector, if available, based on the fabrics in your load.
NOTE: Use your Timed Drying cycle to complete drying if items are still damp after the Automatic cycle.
8