Whirlpool 8280525 Stopping and restarting your dryer, Drying tips, Cycle and temperature tips

Page 9

USING YOUR DRYER

STARTING YOUR DRYER (CONT.)

5.(OPTIONAL STEP) If your dryer has a Cycle Signal (End of Cycle Signal) selector, set the selector to On if you want the dryer to sound a signal when a cycle is finished.

The signal is helpful when you are drying permanent press, synthetics, and other items that should be removed from the dryer as soon as it stops.

On some models, the End of Cycle Signal is part of the Start button.

On some models, the End of Cycle Signal volume can be adjusted from Softer to Louder.

6.Push the Start button.

Stopping and restarting your dryer

You can stop your dryer anytime during a cycle.

To stop your dryer:

Open the dryer door or turn the Cycle Control knob to Off.

NOTE: The Cycle Control knob should point to an Off area when the dryer is not in use.

To restart your dryer:

Close the door, select a new cycle and temperature (if desired), and push the Start button.

NOTE: Your dryer stops automatically when a cycle ends.

SELECTING A CYCLE AND TEMPERATURE SETTING

The following pages describe the drying cycles on

Drying tips

your dryer. The descriptions include suggested

Always follow care label directions when they are

temperature settings and drying times for various

loads.

available.

If you use fabric softener sheets, always use

 

Cycle and temperature tips

softener sheets that are labeled as dryer safe and

follow package instructions carefully.

Make sure you have selected the correct cycle

Remove the load from the dryer as soon as

and temperature for your load.

tumbling stops to reduce wrinkling. This is

Dry most loads using the Energy Preferred

especially important for permanent press, knits,

Automatic Setting (*).

and synthetic fabrics.

Use an air cycle (or temperature setting), or line

 

dry rubber, plastic, delicate, and heat-sensitive

 

fabrics.

 

If some types of loads in the cycle descriptions

 

on the following pages have more than one

 

suggested temperature setting, choose the

 

lowest setting available on your dryer.

 

The last few minutes of all cycles are without

 

heat to make the load cooler to handle.

 

 

 

9

Image 9
Contents 8280525 ElectricPlease record your modelÕs information Thank you for buying a Whirlpool applianceOn next Dryer SafetyDryer Safety Additional features your dryer may have Parts and FeaturesVenting Checking Your VentChecking Your Vent Starting Your Dryer Using Your DryerStopping and restarting your dryer Cycle and temperature tipsDrying tips To stop your dryerCycle Descriptions LoadingLoading suggestions Automatic cyclesTowels feature Damp Dry featureDelicates feature Timed cyclesTumble Press feature Rack Dry featureFinish Guard Finish Guard Plus feature Type of Load Fluff AIR Cycle Fluff AIR CycleTo use the drying rack Using the Drying Rack Available AS AN Option on Some ModelsEvery load cleaning Cleaning the Lint ScreenAs needed cleaning Caring for Your DryerTo clean dryer drum Cleaning the Dryer InteriorTo change drum light type Changing the Drum LightCommon Drying Problems TroubleshootingCommon Drying Problems If YOU Need Assistance or Service Assistance or ServiceIf YOU Need Replacement Parts For Further AssistancePage Page Page Service company Whirlpool Dryer Warranty