Whirlpool 8577213C installation instructions Make Electrical Connection, Power Supply Cord Method

Page 11

INSTALLATION INSTRUCTIONS – ELECTRIC DRYER

Move Dryer Into Position

WARNING

Excessive Weight Hazard

Use two or more people to move and install dryer. Failure to do so can result in back or other injury.

NOTE: Slide dryer onto cardboard or hardboard before moving to avoid damaging floor covering.

1.Using two or more people, move dryer to desired installation location.

2.Take tape off front corners of dryer. Open dryer and remove the literature and parts packages. Wipe the interior of the drum thoroughly with a damp cloth.

3.Take two of the cardboard corners from the carton and place them on the floor in back of the dryer. Firmly grasp the body of the dryer and gently lay it on its back on the cardboard corners.

4.With one of the legs in hand, check the ridges for a diamond marking. That's how far the leg is supposed to go into the hole.

5.Start to screw the leveling legs into the holes by hand.

(Use a small amount of liquid detergent to lubricate the screw threads so it is easier to turn the legs.) Use a 1" wrench or socket wrench to finish turning the legs until you reach the diamond mark.

Now stand the dryer up.

6.Remove cardboard or hardboard from under dryer.

Make Electrical Connection

Power Supply Cord Method

This dryer is manufactured with the neutral ground wire connected to the neutral (center) of the wiring harness at the terminal block. If local codes do not permit this type of connection, use “Four-wire connection” instructions.

Use a UL-listed power supply kit rated 240-volt min., 30-amp and marked for use with a clothes dryer.

WARNING

Fire Hazard

Use a new UL listed 30 amp power supply cord. Use a UL listed strain relief.

Disconnect power before making electrical connections.

Connect neutral wire (white or center wire) to center terminal (silver).

Ground wire (green or bare wire) must be connected to green ground connector.

Connect remaining 2 supply wires to remaining 2 terminals (gold).

Securely tighten all electrical connections.

Failure to do so can result in death, fire, or electrical shock.

1.Disconnect power.

2.Remove hold-down screw and the terminal block cover.

A

CD

B

A. External ground conductor screw

B.Tab

C.Terminal block cover

D.Hold-down screw

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 8577213C Installation InstructionsDryer Safety What to do if YOU Smell GAS Parts supplied Tools and PartsLocation Requirements Tools neededFront view Minimum Installation ClearancesRecommended Ground Method Electrical Requirements Gas DryerElectrical Requirements Electric Dryer Gas Supply Line Gas Supply RequirementsType of Gas Maximum Vent Length Gas Supply Pressure TestingVenting Requirements Vent System LengthIf an exhaust hood cannot be used Multiple Dryer VentingMake Gas Connection Complete InstallationMove Dryer Into Position Make Electrical Connection Power Supply Cord MethodPower Supply Cord, Four-wire electrical connection Power Supply Cord, Three-wire electrical connection Direct Wire Four-wire electrical connection Direct Wire MethodConnect Vent Direct Wire Three-wire electrical connection8577213C If you need assistance Maintenance instructionsIf dryer does not operate check the following

8577213C specifications

The Whirlpool 8577213C is a versatile and innovative appliance that stands out in the crowded market of kitchen solutions. As a part of Whirlpool's extensive range, this model is designed to meet the demands of modern cooking while offering user-friendly features.

One of the most notable characteristics of the Whirlpool 8577213C is its efficient design. This appliance is crafted with high-quality materials, ensuring durability and longevity in daily use. Its sleek and modern aesthetic not only enhances the kitchen’s appearance but also makes cleaning a hassle-free experience. The smooth surface helps to resist stains and marks, preserving its visual appeal over time.

Functionality is at the core of the Whirlpool 8577213C. It comes equipped with an array of cooking technologies that allow users to prepare meals with precision and ease. This model features advanced cooking settings, including multiple temperature ranges and preprogrammed options that cater to various cooking needs. Whether you're roasting, baking, or broiling, this appliance delivers consistent results every time.

Another standout feature is its intuitive control panel, which simplifies the cooking process. The user interface is designed to be straightforward, making it accessible for cooks of all skill levels. With clearly labeled buttons and easy-to-read displays, users can quickly navigate through options and set their desired cooking modes.

The Whirlpool 8577213C also emphasizes energy efficiency, adhering to ecological standards while delivering powerful performance. It is engineered to minimize energy consumption, making it an environmentally friendly choice without compromising cooking quality. This model not only saves on utility bills but also aligns with the increasing consumer demand for sustainable appliances.

In addition to its technical features, safety is prioritized in the Whirlpool 8577213C design. It includes safety lock functions and automatic shut-off settings. These features provide peace of mind while cooking, knowing that the appliance will operate safely even during busy kitchen routines.

In summary, the Whirlpool 8577213C represents the perfect blend of style, efficiency, and advanced technology. With its durable construction, user-friendly interface, energy-saving capabilities, and safety features, it is an essential tool for any modern kitchen. Whether you're a novice cook or a seasoned chef, this appliance enhances the culinary experience, streamlining the process and maximizing creativity in the kitchen.
Top Page Image Contents