Whirlpool LE5530XM manual Drying tips, Fluffair

Drying tips

TUMBLE PRESS” Setting

The dryer does not heat when the Temperature Selector is set on FLUFF AIR. The setting is useful for fluffing bedding, pillows and clothing, or dusting drapes.

Use FLUFF AIR when drying heat- sensitive items, such as plastic shower curtains, rubber-backed

rugs, plastic tablecloths, foam rubber pillows, stuffed toys, sneakers, etc.

1.Set Temperature Selector on

FLUFFAIR.

2.Turn Control Knob to the number of minutes you want in the PERMANENT PRESS Cycle.

3.Push START Button.

Mixed loads

When drying a load with different

kinds and weights of fabrics, use the cycle suggested for the lightest fabrics. When the dryer stops, remove dry items and reset the control.

The TUMBLE PRESS setting removes wrinkles from dry clothing such as items that may have been packed in a suitcase, closet, or items not removed from the dryer.

1.Set Temperature Selector on PERM’T PRESS/HEAVY HIGH.

2.Set Control Knob on TUMBLE PRESS.

3.Push START Button.

The load will tumble in heated air for 5 minutesThe heat shuts off and the dryer continues to tumble the load for 10 more minutes.

For best results, TUMBLE PRESS only a few items at a time. Put them on hangers or fold them as soon as the dryer stops.

Drying			times
Drying		times will vary		depending		on:
l amount of moisture in the clothes.
l type and weight of the fabric.
l size of the load.
l	room	temperature		around	the
	dryer.
l	temperature		of the	wash	rinse
	water.
l amount of lint in the lint screen.
l	dryer	temperature		selection.

See page 6 in your”Dryer Guide” for more information.

7