Whirlpool LE5200XT ?nt screen, Lint removal, Cleaning should be done only by a qualified person

Page 9

?nt screen

Clean the lint screen before each load. A screen blocked by lint can increase drying time and may be a FIRE HAZARD.

Open the lid and pull the lint screen straight out.

ROLL the lint off the screen with your fingers.

DO NOT rinse or wash the screen. Push the screen firmly: back into place

Lint removal

Lint can gather inside the dryer and create a FIRE HAZARD. This lint should be removed at least every 2 to 3 years, or more often, depending on dryer usage.

ELECTRIC DRYERS

GAS DRYERS

Cleaning should be done only by a qualified person.

1. Remove back panel (electric] or lower access panel (gas).

2. Avoid damaging wires, thermostats, funnel or igniter.

3. Remove lint from shaded area - see art-with a soft brush or vacuum cleaner.

4. Replace panel; reconnect and re-level dryer.

9

Image 9
Contents Automatic Dryers Contents Parts and featuresGas supplier Immediately CallPermanent PRESS, Synthetics and Blends Type of Load COTTONS-LINENSKnits RUBBER, PLASTIC, HEAT-SENSITIVE FabricsSelect a Cycle Set Push the Start Button To stop and restart DryerStart Automatic cycles Timed dryingAutomatic @hying tips Automat . if g-MISER ControlFluff AIR Mixed loads Drying times?nt screen Cleaning should be done only by a qualified personLint removal GAS DryersCleaning dryer interior Caring for your dryerVacation care If you need assistance? Before calling for AssistanceWarranty Drooi