Whirlpool EL3030W, GL3030W, Gl2020W, EL2020W operating instructions @Q=

Page 7

3. Push the Start Button to start the dryer.

4. To stop and restart the dryer:

l Open the door or turn the Cycle Control Knob to OFF to stop the dryer.

l Close the door, select a cycle (ii necessary) and push the Start Button to restart the dryer.

5.To change the cycle and/or time, turn the Cycle Control Knob either way to point to a new setting. The Cycle Control Knob should point to an OFF area when the dryer is not in use. If the dryer is stopped before the cycle is finished turn the Cycle Control Knob to an OFF area.

0
	\	a
	/	‘.
		\
0	-	j
@Q=

Image 7

Contents UseAndCam Thank you for buying a Roper appliance Your safety is important to usAdditional safety instructions and your responsibilities Important Safety InstructionsHazard Control panels Elzozow and Glzozow Parts And FeaturesStarting your dryer Operating InstructionsThis Section HPWF Fire Hazard @Q= AIR cycle or setting This Cleaning the lint screenLint screen maintenance Caring For Your DryerTo clean dryer exterior Cleaning the dryerLint removal Removaaoraw Common Laundering ProblemCauseysolutions GuideProblem Check Vacation care Drying tipsDryer fabric softeners Energy saving tipsBefore calling for assistance If You Need AssistanceIf you are not satisfied with how the problem was solved If you need serviceIf you need assistance Page Page What WE will not PAY for Dryer WarrantyLength Warranty Full ONE-YEAR Warranty