Lint on load |
| Loads are wrinkled |
■Is the lint screen clogged?
Lint screen should be cleaned before each load.
Stains on load or drum
■Was dryer fabric softener properly used?
Add dryer fabric softener sheets at the beginning of the cycle. Fabric softener sheets added to a partially dried load can stain your garments.
Drum stains are caused by dyes in clothing (usually blue jeans). This will not transfer to other clothing.
■Was the load removed from dryer at the end of the cycle?
■Was the dryer overloaded?
Dry smaller loads that can tumble freely.
Odors
■Have you recently been painting, staining or varnishing in the area where your dryer is located?
If so, ventilate the area. When the odors or fumes are gone from the area, rewash and dry the clothing.
■Is the electric dryer being used for the first time?
The new electric heating element may have an odor. The odor will be gone after the first cycle.
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check the
“Troubleshooting” section. It may save you the cost of a service call. If you still need help, follow these instructions.
If you need assistance or service
If your problem is not due to any of the items listed in the
“Troubleshooting” section, contact the dealer from whom you purchased the dryer, or a designated Whirlpool service company.
When calling, please know the purchase date, and the complete model and serial number of your appliance. This information will help us better respond to your request.
For further assistance
If you need further assistance, you can write or call with any questions or concerns at:
Whirlpool UK Ltd.
209 Purley Way
Croydon
CR9 4RY
U.K.
Telephone: 0208 649 5000
8543156
© 2005 Whirlpool Corporation. |
| 5/05 |
All rights reserved. | ® Registered Trademark/TM Trademark of Whirlpool, U.S.A. | Printed in U.S.A. |