Miele G 7893 operating instructions Correct application

Page 5

Warning and Safety instructions

This washer-disinfector complies with all relevant local and national safety requirements. Please note that incorrect use can lead to personal injury and damage to property.

To avoid the risk of accidents and damage to the machine, please read these instructions carefully before using it for the first time. They contain important information on its safety, use and maintenance.

Keep these instructions in a safe place for future reference, and pass them on to any future user.

Correct application

￿This washer-disinfector is designed for use with the applications described in these Operating Instructions only.

Alterations or conversions to the machine or using it for purposes other than those for which it was designed are not permitted and could be dangerous. This machine must only be used for cleaning and disinfecting laboratory utensils or medical equipment if the manufacturer has stated that they are suitable for machine processing. Follow the manufacturer's instructions. Miele cannot be held liable for damage caused by improper or incorrect use of the machine.

￿This washer-disinfector is intended for stationary, indoor use only.

Please pay attention to the following notes to avoid injury and damage.

￿This washer-disinfector should be commissioned and then maintained by a Miele authorised and trained service technician only. A Miele service contract is recommended to ensure compliance with GLP Guidelines and the Medical Device Directive. Unauthorised repairs and other work could be dangerous, for which the manufacturer cannot be held liable.

￿Do not install the washer-disinfector in an area where there is any danger of explosion or of freezing conditions.

￿The electrical safety of this

washer-disinfetor can only be guaranteed if it is correctly earthed. It is most important that this basic safety requirement is observed and regularly tested, and where there is any doubt, the on-site wiring system should be inspected by a qualified electrician. The manufacturer cannot be held liable for damage or injury caused by the lack of or inadequacy of an effective earthing system (e.g. electric shock).

￿A damaged or leaking washer-disinfector is dangerous. Disconnect the machine from the mains immediately and call the Miele Service Department.

￿Personnel operating the machine should be trained regularly. Untrained personnel and children must not be allowed access to the machine or its controls.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Washer-disinfector G Contents Contents Drainage Technical data Programme overview Correct application Page Page Page Disposing of your old machine Using accessoriesSymbols on the machine Examples of application areas Intended useIntended use Guide to the machine Guide to the machine Disposal of your old machine Caring for the environmentDisposal of the packing material Electric door lock Opening and closing the doorTo open the door To close the doorProgramming the water softener Water softenerWhich do not have a water softener Table of settingsFilling the salt reservoir Add salt indicator At the end of each programme Areas of applicationLoading the machine Preparing the load Water connection spring adapter Height adjustable top basketTo adjust the top basket Laboratory utensils Lower basket U 874/1 Upper basket O 188/1106/2 109Chemical processes and technology General notes Problem How to resolve itChemical agents Problem How to resolve it Chemical processes and technology Soiling Problem How to resolve it Chemical processes and technology Adding rinsing agent Dispensing chemical agentsAdd rinsing agent indicator Setting the dosage Adding neutralising agent Add neutralising agent indicator Dosage example Adding cleaning agentDispensing powder cleaning agent Dispensing chemical agents Operation Switching onStarting the programme Selecting the Drying additional functionProgramme sequence indicators Additional drying Switching offProgramme end Cancelling the programme manually Cancelling a programmeProgramme cancellation due to a fault Following applies to all programmable functions Programmable functionsStep Display / Result Setting the dosage concentration Dispensing liquid cleaning agent via DOSStep Venting the dispensing systemDispensing neutralising agent via DOS Buzzer Changing the drying parameters Changing programme parametersChanging the wash parameters Changing the temperature holding time Display / Result Changing the temperature StepProgrammable functions Resetting to factory default settingsSetting the time and date Process documentation Process documentation using documentation softwareProcess documentation using a report printer Service MaintenanceRoutine checks Process validationCleaning the coarse filter Cleaning the filters in the wash cabinetCleaning the flat and micro-fine filters Cleaning the spray arms Cleaning the front of the machine Cleaning the control panelCleaning the wash cabinet Cleaning the door sealsBaskets and inserts SF2 in the display Change the filter Drying unit TA MaintenanceProblem Possible cause Remedy Washer-disinfector Problem solving guideIs not switched on Switched on 17, F 20 F 28 FI-0 switch Problem Possible cause Remedy DOS indicatorCancelled Starts flashing beforeIndicator flashes Problem Possible cause Remedy Indicator startsFlashing before ProgrammeLight flashes Problem Possible cause Remedy Add salt indicator/ indicator Indicator Problem Possible cause Remedy Programme isWater in the wash Cabinet is not heated F18, F19, F27For powder cleaning Problem Possible cause Remedy Cleaning agent residuePowder cleaning Cancelling a programmeCloudy and etched Problem Possible cause Remedy Glass utensils areStainless steel utensils Are corrodedItems Problem Possible cause Remedy White residues and/orFlecks are visible on Unsatisfactory Problem Possible cause Remedy Cleaning result isThermal cut-out Other problemsCleaning the drain pump and non-return valve To clean the filter Cleaning the filters in the water inletAfter sales service Building the machine under a continuous worktop InstallationCover plate protects the worktop Levelling and securing the machineAdditional equipotential bonding Electrical connectionConnection to the water inlet PlumbingAustralia and New Zealand Drainage Technical data Customer Programme overviewDOS 0366
Related manuals
Manual 76 pages 25.56 Kb

G 7893 specifications

The Miele G 7893 is a top-of-the-line dishwasher designed for modern kitchens, combining advanced technology with superior functionality. This appliance exemplifies Miele's commitment to quality, performance, and sustainability, making it a perfect choice for discerning homeowners.

One of the standout features of the G 7893 is its impressive energy efficiency. It carries the highest energy rating, ensuring that it not only cleans your dishes effectively but also minimizes energy consumption. Coupled with its Eco program, users can wash their items thoroughly while being environmentally conscious. The dishwasher’s efficiency extends to water usage as well, with innovative technologies that reduce consumption without compromising cleaning power.

The G 7893 utilizes Miele's unique AutoOpen Drying technology, which automatically opens the door ajar at the end of the wash cycle to enhance drying results. This feature ensures that steam escapes, promoting optimal airflow and resulting in spotless, dry dishes every time. Additionally, the dishware is well protected from scratches and marks thanks to the thoughtfully designed interior.

Miele has prioritized flexibility in the G 7893’s design. The FlexLine baskets are adjustable and customizable to accommodate various dish shapes and sizes. This adaptability allows for greater loading convenience and efficiency. Furthermore, the height-adjustable upper basket and foldable tines offer even more versatility, making it easier to fit larger pots or delicate glassware into the machine.

For those who seek a quiet appliance, the Miele G 7893 excels in this area as well. With a noise level of a mere 44 dB, this dishwasher operates quietly, which is particularly beneficial in open-plan living spaces. Users can run their dishwasher any time of day or night without disturbing the household.

Miele's innovative Field Sensor technology is another highlight, allowing users to save time and resources by measuring the level of soiling on dishes. The dishwasher automatically adjusts the cycle duration and water usage accordingly, ensuring optimal cleaning performance.

In summary, the Miele G 7893 is a sophisticated dishwasher that combines advanced technologies with exceptional design. Its energy efficiency, innovative drying solutions, flexible interior, quiet operation, and intelligent sensors make it a worthwhile investment for anyone looking to enhance their kitchen appliance collection. With Miele's renowned build quality, users can expect longevity and performance from this high-end dishwasher, turning dishwashing into a more efficient and enjoyable experience.
Top Page Image Contents