Miele T 8422 C operating instructions Technical safety

Page 6

Warning and Safety instructions

Technical safety

~Before setting up the tumble dryer, check it for any externally visible damage.

Do not install or use a damaged tumble dryer.

~Before connecting the tumble dryer, ensure that the connection data on the data plate (voltage and connected load) match the mains electricity supply. If in any doubt, consult a qualified electrician.

~The electrical safety of this tumble dryer can only be guaranteed when continuity is complete between it and an effective earthing system which complies with current local and national safety regulations. It is most important that this basic safety requirement is present and regularly tested, and where there is any doubt the household wiring system should be inspected by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).

~Do not connect the tumble dryer to the mains electricity supply by an extension lead. Extension leads do not guarantee the required safety of the tumble dryer (e.g. danger of overheating).

~Unauthorised repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be undertaken by a Miele approved service technician. Ensure current is not supplied to the tumble dryer until after maintenance or repair work has been carried out.

~Faulty components must only be replaced by genuine Miele original spare parts. Only when these parts are fitted can the safety standards of the tumble dryer be guaranteed.

~If the connection cable is faulty it must only be replaced by a Miele approved service technician to protect the user from danger.

~In the event of a fault or for cleaning purposes, the tumble dryer is only completely isolated from the electricity supply when:

–it is switched off at the wall socket and the plug is withdrawn, or

–it is switched off at the mains, or

–the mains fuse is disconnected, or the screw-out fuse is removed (in countries where this is applicable).

~This tumble dryer may only be used in mobile installations such as ships if a risk assessment of the installation has been carried out by a suitably qualified engineer.

~In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the tumble dryer and its surroundings in a clean condition at all times. Any damage which may be caused by cockroaches or other vermin will not be covered by the guarantee.

~Do not make any alterations to the tumble dryer, unless authorised to do so by Miele.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operating instructions For condenser tumble dryer T 8422 C Disposal of your old appliance Caring for the environmentDisposal of the packing material Energy saving tipsContents Contents Safety with children Correct applicationTechnical safety Correct use Accessories Operating the tumble dryer Control panelDelay start Programme duration / Estimated time remainingProgrammable functions Care symbols Tips on dryingSort the laundry How to dry correctlyBrief instructions Turn on the tumble dryerSelect any Extra options / Delay start Select a programmeRemove the laundry when the programme has finished Start the programmeBefore the end of a programme Delay start Extra options / Delay startLow temperature BuzzerHand iron**, Machine iron Programme chartCottons Max. load 6 kg Extra dry, Normal Minimum iron Max. load 3 kg Extra dry, Normal**, Hand ironWoollens handcare Max. load 2 kg Silks handcare Max. load 1 kgSmoothing Max. load 3 kg Denim Max. load 3 kg Normal, Hand iron Automatic Max. load 3.5 kg Normal, Hand ironShirts Max. load 2 kg Normal, Hand iron Outerwear Max. load 2 kg Normal, Hand ironAdding or removing laundry after a programme has started Changing the programme sequenceOnce a programme has started Time remainingElectronic system lock To activate the lockTo deactivate the lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Replacing the condenser unit Problem solving guide Check and fault messagesTo switch off the indicator Problem Possible cause RemedyAirways indicator Buzzer sounds To switch off the indicator LightOther problems Dryer after Problem Possible cause Remedy Water leaks fromBeen cleaned Condenser unit hasInterior drum Problem Possible cause Remedy Tumble dryer fails toStart when switched on Lighting does not comeChanging the lamp Appliance guarantee After Sales serviceFuture updates PC Optional accessoriesInstallation Front viewRear view Installation siteTransporting the tumble dryer to its installation site Replacing the lidBefore moving the tumble dryer again e.g. when moving house Levelling the tumble dryerWasher-dryer stack External condensed water outlet General notesArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gullyFit adapter 1 to the sink drain outlet Non-rewireable plugs BS Electrical connectionElectrical connection U.K Consumption data Outerwear NormalTechnical data Programmable functions For changing default settings Programmable functions Extending the range of the drying levelsAltering the volume of the buzzer Normal buzzer Default setting Loud buzzerFollow steps a to F to programme and store in memory Memory deactivated Default setting Memory activated Memory functionExtending the cooling down time Cooling down time will be ten minutes longerClean out airways indicator Default settingKeypad tone Adjusting the dryers electronics for very soft water Alteration rights reserved/2008

T 8422 C specifications

The Miele T 8422 C is a high-performance tumble dryer that brings excellence and innovation to your laundry experience. Known for its robust build quality and advanced technologies, this model is designed for those who value efficiency and superior garment care.

One of the standout features of the T 8422 C is its energy efficiency. It boasts a drying efficiency class of B, which ensures that while your clothes are dried thoroughly, energy consumption remains within optimal levels. This not only reduces utility bills but also minimizes environmental impact.

A key technology incorporated into this model is Miele's patented PerfectDry system. This intelligent moisture sensor technology adjusts the drying time based on the moisture content of the load, ensuring that your laundry is dried precisely to your chosen level—be it iron-dry, cupboard-dry, or extra-dry. This attention to detail helps to prolong the lifespan of your fabrics, preventing over-drying and conserving your clothing’s quality.

The T 8422 C also features a spacious 8 kg drum capacity, making it ideal for families or individuals with larger laundry needs. The stainless steel drum design helps to reduce fabric wear during the drying cycle, ensuring that your garments come out looking fresh and well-maintained.

One of the user-friendly attributes of the T 8422 C is its intuitive controls, which include a clear display and straightforward program selection. There are various automatic and timed programs available, allowing for flexibility when drying different types of fabric, from delicate items to heavy bedding.

Additionally, the model features a heat exchanger system that allows for efficient heat recovery, ensuring that warm air is reused during the drying process. This not only increases efficiency but also contributes to lower wear on the dryer itself.

With Miele's renowned build quality and rigorous testing, the T 8422 C is designed to last. It exemplifies durability and reliability, making it a sound investment for any household. Alongside its technological advancements, the dryer is also exceptionally quiet during operation, allowing for uninterrupted daily life.

In summary, the Miele T 8422 C combines efficiency, advanced technology, and user-friendly features to deliver an exceptional laundry solution, making it a preferred choice for those who prioritize care in their drying process.
Top Page Image Contents