Dryer care
Changing the light bulb
,WARNING
To reduce the risk of electric shock, disconnect this appliance from the power supply by unplugging or trip- ping the circuit breaker.
^Unscrew the plastic bulb cover lo- cated inside the drum and above the door (see illustration.)
^Replace the light bulb with a temper- ature proof bulb (part # 02 150 900) available from Miele’s Technical Ser- vice Department.
The light bulb must not exceed the maximum wattage quoted on the data plate.
^Refit the plastic bulb cover.
Take care that the bulb cover is tightened into place. Otherwise moisture may penetrate the socket and cause a short circuit.
Power failure - Emergency door release
^Pull forward on the unhinged side of the door.
17