Setting DVD preferences
: Picture menu (PICTURE)
7 MONITOR TYPE
You can select the monitor type to match your TV when you play DVDs recorded in the picture’s height/width ratio of 16:9.
•16:9 (Wide television conversion)
Select this when the aspect ratio of your TV is fixed on 16:9 (wide TV).
When you play DVDs recorded in the picture’s height/width ratio of 4:3, the system adjust the ratio of output signal automatically.
•4:3 LB (Letter Box conversion)
Select this when the aspect ratio of your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars appear on the top and the bottom of the screen.
•4:3 PS (Pan Scan conversion)
Select this when the aspect ratio of your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars do not appear, however, the left and right edges of the pictures will not be shown on the screen.
Ex.: 16:9 | Ex.: 4:3 LB | Ex.: 4:3 PS |
NOTE
•Even if “4:3 PS” is selected, the screen size may become “4:3 LB” with some DVDs. This depends on how DVDs are recorded.
7 PICTURE SOURCE
When you set the scan mode to “PROGRESS” (A pg. 18), you can obtain optimal picture quality by selecting whether the content on the disc is processed by frame (film source) or by field (video source) .
Normally set to “AUTO”.
•AUTO
Used to play a disc containing both video and film source materials.
This system recognizes the source type (video or film) of the current disc according to the disc information.
•If the playback picture is unclear or noisy, or the oblique lines of the picture are rough, try to change to other modes.
•FILM
Suitable for playing back a film source disc.
•VIDEO
Suitable for playing back a video source disc.
7SCREEN SAVER (A pg. 22)
You can activate or deactivate Screen Saver function.
7 FILE TYPE
When several types of files are recorded on a disc, you can select which files to play.
•AUDIO
Select this to play MP3/WMA files.
•STILL PICTURE
Select this to play JPEG files.
: Audio menu (AUDIO)
7 D. RANGE COMPRESSION
(Dynamic range compression)
You can enjoy low level recorded sound clearly at night even at a low volume when listening to the sound with Dolby Digital.
•AUTO
Select this when you want to enjoy surround sound with its full dynamic range (no effect applied).
•ON
Select this when you want to fully apply the compression effect (useful at midnight).
NOTE
•When you play a multichannel Dolby Digital source with the surround mode is off, the setting of D. RANGE COMPRESSION is set to ON automatically.
: Speaker setting menu
(SPK. SETTING)
7 Level menu (LEVEL)
FRONT LEFT SPEAKER/FRONT RIGHT SPEAKER/ CENTER SPEAKER/SURROUND RIGHT SPEAKER/ SURROUND LEFT SPEAKER
While monitoring the test tone, adjust the center and surround speakers volume as much as that of the front speakers.
TEST TONE*
Outputs the test tone.
*The test tone comes out of all of the activated speakers in the following sequence:
s Front left speaker s Center speaker s Front right speaker s Surround right speaker s Surround left speaker s (back to the beginning)
7 Delay menu (DELAY)
Example:
CenterSubwoofer speaker
1 ms
| Front right |
Front left | 0 ms |
0 ms |
|
Surround left |
| Surround right |
2 ms |
| 2 ms |
|
|
|
In this case, set the delay time of each speaker as follows;
•Delay time of front speakers: 0 ms
•Delay time of center speaker: 1 ms
•Delay time of surround speakers: 2 ms
FRONT LEFT SPEAKER/FRONT RIGHT SPEAKER/ CENTER SPEAKER/SURROUND RIGHT SPEAKER/ SURROUND LEFT SPEAKER
Adjust the distance from the listening position to the speakers.
Within the range from 0 ms to 15 ms. (by 1 ms)
37