40000518.qxd 07/11/2003 12:13 Page 9
Cold Water Supply
If you have no hot water supply or your hot water pressure is low:
A cold fill adapter , allowing the installation of the machine with a cold water supply only can be purchased from Gias Service
(Tel. No. 01204 556111).
Water supply requirements
Connect the machine to the drainage system used by household sinks.
THIS MACHINE MUST BE CONNECTED IN ACCORDANCE WITH THE WATER SUPPLY REGULATIONS. WATER BYELAWS PROHIBIT CONNECTION TO A SURFACE WATER DRAIN.
No other appliance should be plumbed into the standpipe.
There are two possible arrangements which can be seen below :-
HOSE SUPPORT
CROOK
DRAIN HOSE
32mm
min 80cm
| FIX SECURELY |
| ABOVE OVERFLOW |
HOSE SUPPORT CROOK | OUTLET OF SINK |
DRAIN HOSE
ATTACH HOSE
SECURELY TO
WASTE OUTLET
For the washing machine to function properly the outlet end of the drain hose must be at a minimum of 60 cm and a maximum of 80 cm from the ground.
9