Controls and Indicators

Programme	Filter Care	Program	Start/Pause
Selector	Indicator	Display	Button

Time Selection	Delay Start	Acrylic Synthetic	Anti-Crease
Button	Button	Button	Button

Control Panel and Indicator Lights

Programme Selector – Select the required programme

Time Selection Button – Allows the user to change duration of the program selected by Programme Selector. It can be used only with the selection of: Mix&Dry, Shirts and Time Programs Delay Start Button – Allows the user to delay the start of the drying cycle (see details of Operation )

Acrylic Synthetic Button – Press to select the type of fabrics to dry Acrylic and Synthetics, when

pressed Acrylic Synthetics option is activated and the indicator lights up.

Anti- Crease Button – Allows the user to select a post drying anti-crease cycle. Start/Pause Button – Press to commence/ to pause the selected drying programme.

Memo Button – Allows user to record the program by pressing simultaneously the Anti- Crease and the Acrylic Synthetic buttons for 3 seconds, after 2 minutes duration of the chosen program/option

Filter Care indicator – lights when the filter needs cleaning

Program Display – Related indicator lights when a auto program has been selected.

Refresh – The indicator lights up when the program starts the cool down stage.

SELECTING THE PROGRAMME

The Sensor Dry machine gives many options for drying the laundry to suit all circumstances. The table on the next page lists the programmes and the function of each programme.

Note:

The sensor may not detect a small load of small articles. For small loads and separate items or pre-dried fabrics with low moisture content, use the timed programmes.

If the sensor does not detect the item the dryer will only operate for 10 minutes before going into cooldown.

If the load is too large or too wet to tumble dry the dryer will automatically go into cooldown after approximately 3 hours.

In these cases we advise to use a time cycles between 30 and 75minutes depending on the load size and dryness required, and select high or low heat depending upon the fabric type.

EN 8