Kambrook KI820 manual Anti Drip System, Safety Auto-Off

Anti Drip System

The Kambrook DuraGlide™ Anodized Iron is equipped with an Anti-Drip System. The iron will automatically close the steam valve when the soleplate temperature is too low to produce steam. When this happens you will hear a click sound. It is safe and will not harm the performance of the iron.

This is the reason the fine mist spray should be used when ironing delicate fabrics at low temperatures.

The steam valve will open once the soleplate has reached the temperature required to create steam.

Safety Auto-Off

The Safety Auto-Off feature is designed to switch the iron off if forgotten.

When the iron is left in the upright position it will shut off after approximately 8 minutes, followed by six beeps.

When left in the ironing position it will switch off after approximately 30 seconds, followed by six beeps.

Once the iron has shut itself off, the indicator light will blink to indicate that the iron has switched off.

To reactivate the iron, simply move the iron. The heating indicator light will switch on when the iron has reached the temperature selected on the temperature dial.

CautION: Safety Auto- off is designed as a safety feature only. Irons should not be left switched on deliberately while unattended. If safety Auto-Off has activated and no further ironing is required, we recommend that the iron is switched off at the power outlet and unplugged.

11