-Stand the iron upright and press the plug it in.
-Turn the temperature gauge to the ***position.
-Let the iron heat up until the pilot light goes off and comes back on again.
-Unplug the iron and place it over the sink.
-Push the
-Let the water flow out through the steam vents in the base, while lightly shaking the iron.
-Release the
-Let the iron cool and then clean it.
Anomalies and repair
Go to an authorized Technical Support Service in the event of malfunctions. Do not try to dismantle or repair the iron yourself, as this may be dangerous. If the connection to the mains has been damaged, it must be replaced, and you should proceed as you would in the case of damage.
Ecology and recyclability of the product
- The materials of which the packaging of this ap- pliance consists are included in a collection, clas- sification and recycling system. Should you wish to dispose of them, use the appropriate public con- tainers for each type of material.
-The product does not contain concentrations of substances which could be considered harmful to the environment.
-Should you wish to dispose of the product once its working life has ended, take it to an authorised waste agent for the selective collection of waste from electric and electronic appliances.
23455_IM.indd 4 |
|
| 5/21/2010 9:36:04 AM |
|
| ||
|
|
|
|