Mellerware 23005G manual KEY and Characteristics, Important Safeguards

Page 2

KEY and CHARACTERISTICS

Description

1.Soleplate

2.Heat-insulated plate

3.Spray nozzle

4.Water tank

5.Spray button

6.Steam button

7.Pilot light

8.Temperature control knob

9.Handle

10.Front cover

11.Back cover

12.Power supply cord

IMPORTANT SAFEGUARDS

1.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety

2.Children should be supervised to ensure that they do not play with the appliance.

3.Do not operate the appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return the product to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. 1.

Please read all instructions carefully before using the appliance for the first time.

4.Before connecting the appliance, check if the voltage indicated on the rating label corresponds with the mains voltage in your home.

5.Do not use appliance for anything other than its intended use.

6.The iron should always be switched off before connecting or disconnecting from the power supply. Do not pull on the cord to disconnect the plug from the wall socket.

7.Do not use the iron when it is damaged in any way. Do not operate the iron with a damaged cord or plug. Do not replace the power cord or any other parts by yourself. Bring the iron to the nearest authorized service facility or to the shop where you bought it, as special tools are required for repair.

8.When you have finished ironing or when you only leave it for a short while, stand the iron upright and then disconnect the iron from the wall outlet.

9.Do not allow children to touch the iron or the power cord when ironing.

10.Do not immerse the iron or the cord into water or any other liquid.

11.Do not touch hot metal parts, hot water or steam. These parts become hot and may cause burns.

12.The plug and cord should not be allowed to touch the hot soleplate. Let the iron cool down completely before taking it away.

13.Disconnect the iron from the wall outlet for pouring in

water or when you remove the water after use.

14.To avoid an overloaded circuit, do not operate another high voltage appliance in the same electric circuit.

15.Never use an extension power cord set that is not approved by a competent authority. The cord should be arranged in a way that it cannot be pulled or tripped over.

16.The iron is for household use only.

SAVE THE INSTRUCTION MANUAL FOR FUTURE REFERENCE

Some parts of the iron have been slightly greased and as result the iron may smoke slightly when switched on for the first time. It will not happen again after a few uses.

Before using for the first time, remove any protective films or stickers from the soleplate and the cabinet.

Then clean the soleplate with the soft cloth. When using the iron for first time, test it on an old piece of fabric to ensure that the soleplate and water tank are completely clean.

 

X

On label means: THIS ARTICLE

NOTE:

CANNOT BE IRONED!

(eg: Chlorofibre, Elastodiene)

LABEL

 

KIND OF TEXTILE

FIBRE MATERIAL

 

 

 

Acrylic

 

 

Synthetic

Modacryl

 

 

Polypropylene

 

 

 

 

 

 

Polyurethane

 

 

Synthetic

Acetate

 

 

Triacetate

 

 

 

 

 

 

Metallized

 

 

 

Cupro

 

 

Synthetic

Polyamide (Nylon)

 

 

Polyester

 

 

 

 

 

 

Modal

 

 

 

Viscose (Rayon)

 

 

Silk

Silk

 

 

Wool

Wool

 

 

Cotton

Cotton

 

 

Linen

Linen

MW 23005G_IM.indd 2

5/6/2010 4:17:35 PM

Image 2
Contents Steam iron Please Read ALL Instructions Before USEKEY and Characteristics Important SafeguardsIroning Instructions Choice of WaterTrouble Shooting Problem Reason Action Pre-caution