Rowenta P2 Professional manual Self Cleaning, Vapodur Valve

Page 9

SELF CLEANING

Your iron is equipped with two self clean functions (depending on model). Do not use descaling a gents in your Rowenta iron.

Vapodur Valve

The patented Vapodur valve ensures that the opening which allows the water to drip from the water tank into the steam chamber of your iron remains unaffected by hard water deposits.

To ensure your iron continues to steam efficiently the valve MUST be opened and closed a few times. This is done by moving the variable steam control left to right a few times each time you finish ironing.

Steam Chamber Cleaning Function (depending on model)

This function allows loose mineral deposits and other impurities that build up inside the iron to be flushed out. This type of self cleaning only needs to be carried out occasionally and never more than once a month.

min

max

Self

 

 

 

 

 

 

￿ Fill the iron with cold tap water and set

 

 

 

 

 

 

 

 

variable steam to min.

 

 

Clean

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

￿ Set thermostat dial to maximum

 

 

 

 

 

 

 

 

 

position.

 

 

 

 

 

0

m l

x

 

￿ Stand on heel and plug in.

 

 

 

3

2

 

m a

 

 

￿ When the iron reaches the correct

 

 

 

 

 

 

 

 

 

 

 

P 2

PROFESS

I

temperature, indicator light will go out,

 

 

anti drip

 

 

 

 

 

 

 

 

 

 

 

unplug iron.

 

 

 

 

 

 

 

 

 

￿ Hold iron horizontally over the sink with

 

 

 

 

 

 

 

 

 

soleplate pointing away from body.

￿Press and hold down the self clean button for about 1 minute.

WARNING: Doing this will cause steam and hot water to be ejected from the soleplate. Take all proper precautions and hold iron away from body.

￿Move the iron gently back and forth and side to side until all water has run through.

￿Carefully wipe all water and material from the soleplate with an old folded towel, as the water and minerals can stain the soleplate (although this has no effect on glide or performance).

WARNING: Iron and soleplate may still be hot, exercise care while wiping.

￿Place iron on heel and leave to cool.

￿IMPORTANT: before using the iron after self cleaning, test steam and burst of steam on an old towel or cloth to ensure all loose material has been removed from the iron.

9

Image 9
Contents P2 Professional Important Safety Instructions Special Instructions Description Before USE WAY AUTO-OFFSteam Ironing Setting Variable Steam Control Selecting the TemperatureIron ready for steam ironing Steam offBurst of Steam Spray SettingVertical Steam Point to NoteWater to USE in Rowenta Irons After IroningSelf Cleaning Steam Chamber Cleaning Function depending on modelVapodur Valve Cleaning the soleplate Cleaning and MaintenanceProblem Possible cause Solution Iron Troubleshooting