Steam Ironing, Spray, Steam blast, Self-cleaning

6.Throw out any excess water after use, once the iron has been unplugged.

Steam Ironing

1.Fill up the iron as described in the section “How to fill the water deposit”.

2.Plug in the iron.

3.Steam ironing is only possible if you select the highest temperature***. Otherwise water may seep through the base of the iron.

4.Wait for the pilot light to go off.

5.Turn the steam regulator to the desired position

6.During pauses and when the ironing is complete, leave the iron standing upright.

7.Unplug the iron by pulling the plug out of the socket. Pour out any leftover water and let the iron cool down.

Spray

1.The spray can be used when dry ironing or when steam ironing.

2.To do so, press the spray button. The spray button has to be pressed repeatedly to release the first spray.

Steam blast

The steam blast gives an extra steam jet to help remove tough creases.

1.Select the maximum temperature*** on the temperature gauge. Wait for the pilot light to go off.

2.Press the steam blast button. Wait a few seconds for the steam to penetrate into the fabric before pressing again. For optimum steam quality, do not apply more than three successive blasts. The spray button has to be pressed repeatedly to release the first spray.

Cleaning and Maintenance

Cleaning

1.Unplug the appliance before proceeding to clean.

2.Do not use solvents or abrasive products for cleaning. A damp cloth with a few drops of washing up liquid is enough.

“Self-cleaning”

1.It is important to self-clean the appliance at least once a month to remove calcium and any other built-up minerals inside the iron.

2.Place the steam regulator control in the No steam position.

3.Fill up the deposit to the top.

4.Stand the iron upright and plug it in.

5.Turn the temperature gauge to the *** position.

6.Let the iron heat up until the pilot light turns off and back on again.

7.Unplug the iron and place it over the sink.

8.Press the self-cleaning button.

9.Let the water flow out through the steam vents in the base whilst lightly shaking the iron.

10.Release the self-cleaning button after a moment or when the deposit has been emptied

and place the iron in an upright position.

11.Let the iron cool and then clean it.

Maintenance

Any stains that may form on the base of the iron can be cleaned off using a cloth dampened with water and white vinegar.

Problems and Solutions

Should the mains connection fail, do not try to replace it since this is potentially dangerous. Take the appliance to an authorized Technical Support Service. The same applies to any other type of problem. This appliance complies with Low Voltage Directive 73/23/ EC and with Electromagnetic Compatibility Directive 89/336 EC.

SAVE THESE INTRUCTIONS

THIS PRODUCT IS FOR HOUSEHOLD USE ONLY!

SERVICE

Before returning your product for service or repair – check the following:

•Your household mains supply socket is working properly.

•The mains supply circuit is not overloaded.

•The instructions for use have been followed carefully.

If service becomes necessary within the guarantee period the appliance should be returned to the retail outlet where purchased or carefully packed and marked “fragile-handle with care“ and sent carriage paid to the address below. (Postage is not refundable) Service outside the guarantee period is still available but this will be chargeable.

_IM.indd 3

2013/08/13 11:51:13 AM

2200W specifications

Mellerware is known for delivering high-quality electrical appliances, and their 2200W kettle, model 27103A, stands out for its combination of efficiency, design, and durability. This modern kettle has become a favorite among households looking for a reliable kitchen appliance that blends performance with aesthetics.

One of the most notable features of the Mellerware 27103A kettle is its powerful 2200-watt heating element. This high wattage ensures rapid boiling, so you can enjoy your tea, coffee, or any hot beverage in no time. The kettle can boil water within minutes, which is particularly convenient for busy mornings or entertaining guests.

The kettle comes equipped with a 1.7-liter capacity, making it suitable for both individual use and larger gatherings. The large capacity is ideal for preparing multiple cups of tea or coffee, catering to families or groups without the need for multiple boils.

In terms of technology, the Mellerware 27103A features a 360-degree rotational base, allowing easy pouring from any angle. This user-friendly design accommodates both right- and left-handed users, ensuring comfort for everyone. Additionally, the kettle has a water level indicator that simplifies monitoring the water amount, preventing overfilling or running dry.

Safety is a primary concern for any electrical appliance, and Mellerware addresses this with several protective features. The kettle is equipped with an automatic shut-off function that activates when the water reaches boiling point, reducing the risk of overheating. Furthermore, the lid is designed to open with a simple push button, ensuring that steam is released safely, minimizing the risk of burns.

The Mellerware 27103A kettle also boasts a sleek, modern design with durable stainless steel construction, which not only adds elegance to your kitchen counter but also ensures longevity and ease of cleaning. Its anti-corrosive surface resists staining and rust, maintaining a polished appearance over time.

In conclusion, the Mellerware 2200W kettle model 27103A combines power, convenience, and safety, making it an excellent addition to any kitchen. Its impressive features and technologies, along with its stylish design, position it as a top choice for consumers seeking a dependable and efficient kettle.