Rowenta Professional Steam Iron manual Before USE, Way Auto-Off, Steam Ironing

Page 5

BEFORE USE

￿Please read the instructions for use and the Important Safeguards carefully.

￿Remove the transparent soleplate protector.

￿It is normal for a small amount of smoke to be produced the first time the iron is used. This will quickly disappear.

3-WAY AUTO-OFF

30 sec.

8 min.

30 sec.

If the iron is not moved while it is plugged in, an internal safety switch will turn it off. It will turn off in 8 minutes if left vertically or in 30 seconds if left on its soleplate or tipped over. A red flashing light indicates that the auto-off has been activated.

To switch the iron on again, move the iron or gently shake it.

Wait until iron is fully reheated before use.

STEAM IRONING

min

max

Self

 

 

 

 

Clean

min

Filling with water

￿Ensure the iron is unplugged.

￿Slide the variable steam control comple- tely to the left.

￿Open the water filling inlet cover.

￿Hold the appliance upright so that the water inlet is horizontal. Fill with water (containing no additives) to the max. water level mark and close the lid.

Adding water

￿If you need to add water during ironing. UNPLUG the iron and repeat above steps.

￿Ensure iron is fully reheated after filling (temperature indicator light goes out) before ironing.

￿To avoid damage to clothes from dust or dirt that may collect in the iron, we recommend that for the first use or after the iron has been stored for some time that you first iron an old cloth, testing both the steam and burst of steam feature.

5

Image 5
Contents Ultra Professional Important Safety Instructions Special Instructions Description Steam Ironing Before USEWAY AUTO-OFF Setting Variable Steam Control Selecting the TemperatureIron ready for steam ironing Steam offBurst of Steam Spray SettingVertical Steam Points to NoteWater to USE in Rowenta Irons After IroningSteam Chamber Cleaning Function Self CleaningLONG-LIFE System Vapodur ValveCleaning the soleplate Cleaning and MaintenanceProblem Possible cause Solution Iron Troubleshooting