SPRAY SETTING
Ensure there is water in the tank.
Moistening the fabric with the spray will make wrinkle removal easier.
Press the spray button down slowly for a jet or quickly and strongly for a mist.
Do not spray silk, etc.
BURST OF STEAM
To remove stubborn wrinkles or press in a sharp crease, use the burst of steam button.
Press the button firmly, a strong burst of steam penetrates deep into the fabric.
Leave an interval of at least four seconds
between pressing the burst of steam button.
With water in the tank, the burst of steam button can be used as soon as the steam ironing temperature has been reached (●●●).
VERTICAL STEAM
The iron can also be used vertically. This is especially useful for getting creases out of hanging clothes, curtains, tapestries, etc.
To steam vertically, press the burst of steam button while holding iron in the upright position.
Warning:
Never iron clothes while they are being worn.
POINTS TO NOTE
If the iron has not been used for a long time (e.g. several weeks) the steam channels should be cleaned and any deposits removed from the iron. To do this, hold the iron horizontally before you start to use it and allow it to produce steam for about 1 minute.
Also activate the burst of steam button several times.
7