Assembly, Operation instructions | Mellerware 23700 guide

Assembly:

1.Insert the 3 legs into the corresponding holes on the bottom of the motor unit as per the below diagram.

2.Connect the three tubes that form the support arm by screwing them in to each other

3.Fit the water-proof plate onto the lower support- ing tube and then attach the lower supporting tube onto the motor body by screwing it in a clockwise direction.

4.Insert the hanger into the upper supporting tube and then pull the aluminum hangers down into the level position.

5.Hang your clothes on the clothes racks, then put on the cover over the unit and zip it closed.

Operation instructions:

1.Insert the plug into power socket; make sure the voltage on the rating label corresponds to the voltage of the mains socket. Ensure the mains power is off when plugging the appliance in and unplugging it.

2.Once you have plugged the appliance in switch on the power at the wall socket.

23700_IM.indd 4

2012/11/01 11:30:58