BURST OF STEAM
Vertical steam
MTo remove stubborn wrinkles or press in a sharp crease, use the burst of steam button.
MPress the button firmly, a strong burst of steam penetrates deep into the fabric.
MLeave an interval of at least four seconds between pressing the burst of steam button.
MWith water in the tank, the burst of steam button can be used as soon as the steam ironing temperature has been reached (●●●)
MThe iron can also be used vertically. This is especially useful for getting creases out of hanging clothes, curtains, draperies, etc.
WARNING:
Never iron clothes while they are being worn.
DRY IRONING
min | ax |
m |
MSlide the variable steam control fully to the left. We recommend dry ironing with an empty tank to be sure there are no drips, but it can also be performed with water in the tank.
AFTER IRONING
MUnplug the iron. Slide the variable steam control completely to the left (the minimum position) and empty any water left in the tank. Leave the iron to cool down.
Integrated cord wrap
MFor easy storage, the cord can be wound
loosely around the heel once the iron has cooled down completely.
M To protect the soleplate always store the iron on its heel.
DM 253/273/293 | 7 |