Before ironing
Testing the finger guard
The finger guard is a safety feature and should be checked each time the rotary iron is used.
^With the rotary iron turned on, press the foot pedal down.
The heater plate comes down onto the rotating roller.
^If you lift the finger guard now, the roller stops rotating and the heater plate rises.
This shows that the finger guard is working.
^Let go of the finger guard and remove your foot from the foot pedal.
^Press the foot pedal down again.
The heater plate lowers and the roller rotates.
Please note:
Any unevenness in the ironing cover will smooth itself out after 3 hours of use.
When using a new machine, if delicate laundry is not properly pulled into the rotary iron continue ironing. This is usually solved after
If a new ironing cover is used, wash the cloth at a high temperature (140°F/ 60°C) to achive an optimal
13