JVC SP-UXP7, UX-P7R, CA-UXP7R manual Using the Timers, Using Daily Timer and Recording Timer

Page 23

Using the Timers

Continued

 

There are three timers available — Daily Timer, Recording Timer and Sleep Timer.

Before using the timers, you need to set the clock built in the unit (see page 9). When you press TIMER on the unit for more than 3 seconds, the display alternates between “ADJUST” and “CLOCK” for about 5 seconds.

Using Daily Timer and Recording Timer

You can set the timer whether the unit is on or off.

2 Set the on-time you want the unit to turn on at.

1)Press ¢ or 4to set the hour, then press TIMER.

2)Press ¢ or 4to set the minute, then

press TIMER.

TIMER

 

The unit enters off-time setting mode.

[DAILY

]

When the on-time comes, the unit automatically turns on

(the indicator flashes just before the on-time, and continues flashing while the timer is operating). Then, when the off- time comes, the unit automatically turns off (on standby). The timer setting remains in memory until you change it.

• When the DAILY indicator is lit on the display, the timer

acts as the Daily Timer. Once the Daily Timer has been set,

it will be activated at the same time everyday until the timer

3 Set the off-time you want the unit to turn off (on standby) at.

1) Press ¢ or 4to set the hour, then press

TIMER.

2) Press ¢ or 4to set the minute, then press TIMER.

The unit enters source selecting mode.

TIMER

is turned off.

• When the REC indicator is lit on the display, the timer acts

as the Recording Timer. After the Recording Timer has

been performed, the details of the setting remain stored but

the timer is turned off.

Before you start...

When using “ TUNER” as the source to play, make sure to select the desired station before turning off the power.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the unit ONLY:

 

1 Press and hold TIMER for more

TIMER

than 3 seconds.

 

The timer ( ) indicator lights up, and the timer mode indicator (DAILY or REC) and the current on-time flash on the display.

The unit enters on-time setting mode.

[DAILY]

4 Press ¢or 4to select

 

 

 

 

 

 

 

 

the timer mode (Daily Timer

 

 

 

 

 

 

 

 

or Recording Timer) and the

 

 

source to play, then press TIMER.

 

 

• Each time you press ¢ or 4, the timer

TIMER

 

 

mode and the source change as follows:

 

 

DAILY TUNER REC TUNER

DAILY TAPE DAILY CD

DAILY TUNER: tunes into the last station you were listening to. (Daily Timer)

REC TUNER: records the last station you were listening to. (Recording Timer)

•Put a recordable cassette into the deck.

DAILY CD: plays a CD. (Daily Timer)

DAILY TAPE: plays a tape. (Daily Timer)

•Make sure that the tape direction is correct.

5 Press ¢or 4to set the volume level.

• You can select the volume level

(“VOLUME 0” to “VOLUME40” and “VOLUME –”).

If you select “VOLUME –,” the volume is set to the last level when the unit has been turned off.

To turn off the volume while the Recording Timer (REC TUNER) is working, set the volume level

“VOLUME 0.”

– 20 –

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Micro Component System Class Laser Product Above ALL About This Manual PrecautionsIntroduction Contents Front Panel Location of the Buttons and ControlsFront Panel Display Window Display WindowRemote Control Remote ControlFM antenna Supplied AccessoriesConnecting Antennas Getting StartedAM MW/LW antenna Connecting SpeakersTurn the AM loop antenna until you have the best reception Release the finger from the clampTo connect audio equipment Connecting Other EquipmentBy using audio cords not supplied, connect To remove the speaker grillesSelecting the Sources and Starting Play Turning On the PowerSetting the Clock Common OperationsSelecting the Sound Modes Adjusting the VolumeSelecting the Display Brightness Reinforcing the Bass SoundListening to FM and AM MW/LW Broadcasts Tuning in a StationPresetting Stations Tuning in a Preset StationSearching for Programs by PTY Codes PTY Search Receiving FM Stations with RDSChanging the RDS Information To activate the EON function Switching to a Program Type of Your Choice TemporarilyOn the remote control only Press PTY/EON until EON Select alternately appear on the displayPress CD 3/8 Playing Back CDs CD/CD-R/CD-RWPlaying Back the Entire CD Normal Play Basic CD OperationsRepeat to program other tracks you Program PlayLoad a CD Press Prog programOn the unit only Playing at Random Random PlayProhibiting Disc Ejection Tray Lock Repeating Tracks Repeat PlayPress 0for cassette deck To play both sides Reverse ModePlaying Back Tapes Playing Back a TapePress REC RecordingRecording on a Tape Check the recording direction for the tapeTo stop CD Direct Recording, press 7. The tape stops after CD Direct RecordingOne Track Recording Repeat steps 2 and 3 to record other tracks you wantUsing Daily Timer and Recording Timer Using the TimersWait for about 5 seconds after specifying the time length Using Sleep TimerOn the remote control only Press Sleep How Sleep Timer actually worksDescription of the PTY codes TroubleshootingAdditional Information Handling cassette tapes MaintenanceCleaning the unit Handling discsSpecifications 0301MWMMDWJEM

SP-UXP7, UX-P7R, CA-UXP7R specifications

The JVC CA-UXP7R, UX-P7R, and SP-UXP7 represent a sophisticated audio system designed for enthusiasts who appreciate high-quality sound and versatile functionality. These models are part of JVC's compact audio range, which combines advanced technology with an elegant design, making it a perfect addition to any home or office environment.

One of the standout features of the JVC CA-UXP7R is its powerful audio performance. This system is equipped with a high-output amplifier that delivers clear and dynamic sound, making it ideal for various musical genres, from classical to contemporary. The speakers, part of the SP-UXP7 model, utilize advanced drivers and specially designed enclosures to produce rich bass tones and crystal-clear highs, ensuring a balanced audio experience.

Connectivity is a critical aspect of modern audio systems, and the JVC CA-UXP7R excels in this area. It includes multiple input options, such as an AUX input for connecting external devices like smartphones and tablets, as well as USB ports for quick access to digital music files. Additionally, users can enjoy their favorite radio stations with the built-in FM/AM tuner, which provides a wide range of listening options.

Another noteworthy feature is the user-friendly interface. The system includes a remote control that allows users to adjust settings and navigate through tracks effortlessly. The easy-to-read display shows track information, radio frequencies, and playback modes, ensuring that users can operate the system without confusion.

The JVC UX-P7R also emphasizes aesthetics, featuring a sleek and modern design that fits seamlessly into any décor. Its compact size makes it easy to place on shelves or desktop spaces without taking up too much room.

In terms of additional technologies, the JVC CA-UXP7R supports various audio formats, enabling playback from CDs, USB drives, and other devices. The integration of advanced sound processing technologies enhances audio playback, ensuring that every note and beat is delivered with precision.

Overall, the JVC CA-UXP7R, UX-P7R, and SP-UXP7 offer a comprehensive audio solution that caters to those who seek both performance and style. With its robust sound capabilities, versatile connectivity options, and contemporary design, this audio system is sure to satisfy audiophiles and casual listeners alike.
Top Page Image Contents