If Something Goes Wrong
Problem | Possible Causes | What to Do |
Water Leaks
Fill hoses or drain hose is improperly connected
•Make sure hose connections are tight at taps and make sure end of drain hose is correctly inserted in and secured to drain facility.
Household drain may | • Check household plumbing. You may need |
be clogged | to call a plumber. |
|
|
Constant water pressure to the | • Tighten hoses at the taps and turn the water |
fill hoses at the water source | off after each use. |
| • Check condition of the fill hoses; they may |
| need replacement after 5 years. |
Washer is Noisy |
| • Make sure washer is level and firm | |
|
| Washer is uneven | |
|
|
| to the floor. |
|
|
|
|
|
| Washer load is unbalanced | • Push the Cycle knob in to stop the |
|
|
| washer, open the lid and redistribute |
|
|
| the load evenly. Close the lid and restart. |
Shipping rod has not been removed
•Remove the shipping rod on the bottom right side of the washer just before sliding the washer in place. Do not use the washer with the shipping rod in place.
Water is draining | • There will be a gurgling, “sucking” sound |
| prior to the spin cycle. This is normal and |
| will stop as soon as the machine goes into |
| the spin cycle. |
Washer Pauses in Cycle
The washer normally pauses between washing steps
Clothes too Wet |
| • Make sure the cycle selected matches the | |
|
| Incorrect cycle | |
|
| selected | load you are washing. |
|
|
|
|
|
| This is normal for some fabrics |
|
|
|
|
|
12