GE 175D1807P270 Water Heater Safety, Read and follow this Safety Information carefully

Page 3

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING! For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

WATER HEATER SAFETY

Under certain conditions hydrogen gas may be produced in a water heater that has not been used for two weeks or more. Hydrogen gas can be explosive under these circumstances.

If the hot water has not been used for two weeks or more, prevent the possibility of damage or injury by turning on all hot water faucets and allowing them to run for several minutes. Do this before using any electrical appliance which is connected to the hot water system. This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance during this process.

PROPER INSTALLATION

This washer must be properly installed and located in

■Install or store where it will not be exposed to

accordance with the Installation Instructions before it is

temperatures below freezing or exposed to the weather.

used. If you did not receive an Installation Instructions

■Properly ground washer to conform with all governing

sheet, you can receive one by calling us toll-free at the

codes and ordinances. Follow details in Installation

GE Answer Center®, 800.626.2000.

 

Instructions.

YOUR LAUNDRY AREA

■Keep the area underneath and around your

■Close supervision is necessary if this appliance is used

appliances free of combustible materials such

by or near children. Do not allow children to play

as lint, paper, rags, chemicals, etc.

on, with, or inside this or any other appliance.

WHEN USING THE WASHER

 

Safety Instructions

Operating Instructions

Use this appliance only for its intended purpose as described in this Owner’s Manual.

■Never reach into washer while it is moving. Wait until the machine has completely stopped before opening the lid.

■Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing different chemicals can produce a toxic gas which may cause death.

■Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.) which may ignite or explode. Do not add these substances to the wash water. Do not use or place these substances around your washer or dryer during operation.

■The laundry process can reduce the flame retardancy of fabrics. To avoid such a result, carefully follow the garment manufacturer’s wash and care instructions.

■To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning. NOTE: Turning the Cycle Selector knob to an off position does NOT disconnect the appliance from the power supply.

■Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

Troubleshooting Tips

WHEN NOT IN USE

■Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage if a break or rupture should occur. Check the condition of the fill hoses; they may need replacement after 5 years.

■Before discarding a washer, or removing it from service, remove the washer lid to prevent children from hiding inside.

■Do not attempt to repair or replace any part of this appliance unless specifically recommended in this Owner’s Manual, or in published user-repair instructions that you understand and have the skills to carry out.

■Do not tamper with controls.

Customer Service

Read and follow this Safety Information carefully.

SAVE THESE INSTRUCTIONS

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Washers Congratulations You Are Now Part of the GE Family Read and follow this Safety Information carefully Water Heater SafetyTemperature Load SizeWash Cycle Wash Control SettingsWash/Spin Speed InstructionsExtra Heavy Liquid Bleach Dispenser on some models Extra Rinse on some modelsSensorWash on some models Troubleshooting Cleaning the Fabric Softener Dispenser on some modelsColors Sorting Wash LoadsProper Use of Detergent Loading the WasherFabric Care Labels Care and Cleaning of the WasherLight on some models Possible Causes What To Do SensorWash indicatorFeatures section Water temperatureColored spots Possible Causes What To DoWasher won’t operate Possible Causes What To Do Clothes too wetWrinkling Peel off cleanlyCon Performance Possible Causes What To Do Pilling Or excessive wearFor The Period We Will Replace Service Satisfaction Special Needs ServiceService Contracts Parts and Accessories

175D1807P270 specifications

The GE 175D1807P270 is a highly regarded component within the GE range of products, specifically known for its reliability and efficiency in various applications. This device, designed to suit a wide array of industrial needs, incorporates advanced technologies that enhance its performance and usability.

One of the standout features of the GE 175D1807P270 is its robust build quality. Engineered to withstand demanding environments, it is constructed with durable materials that ensure long-lasting operation, minimizing downtime due to failure. This durability is crucial in sectors such as manufacturing and energy, where reliability is paramount.

Another essential characteristic of this model is its compact design, which allows for easier integration into existing systems or equipment. The streamlined form factor not only saves space but also facilitates installation and maintenance, making it a practical choice for facilities with limited room for expansion or upgrades.

The GE 175D1807P270 also boasts advanced control capabilities. It integrates seamlessly with various control systems, allowing users to monitor and manage their operations efficiently. This feature is particularly beneficial in industrial automation, where precise control and real-time feedback are essential for optimizing processes.

In terms of technology, this model incorporates innovative safety features that protect both the unit and the equipment it operates. Over-voltage, over-current, and thermal protection mechanisms are built in to prevent damage from unexpected surges or faults, enhancing the overall safety of the operation. These safety measures are critical for maintaining operational integrity and protecting investments.

Additionally, the GE 175D1807P270 is designed with energy efficiency in mind. It helps reduce energy consumption during operation, aligning with modern goals of sustainability and cost-effectiveness in industrial settings. By decreasing energy usage, the device not only lowers operational costs but also contributes to a reduced environmental footprint.

In summary, the GE 175D1807P270 is a versatile and efficient solution that stands out due to its durability, compact design, advanced control features, innovative safety mechanisms, and energy-efficient operation. These characteristics make it an excellent choice for various industries, from manufacturing to renewable energy, ensuring it meets the evolving demands of modern industrial applications. Whether for new installations or as part of an upgrade, this model is equipped to deliver reliable performance and exceptional value.
Top Page Image Contents