Features
Blast of Steam and Spray Buttons
Push Blast Button 
for an extra blast of steam. Push Spray Button 
to release a fine spray of water for difficult wrinkles in cotton or linen.
Blast Spray
Adjustable Steam Control
This control provides minimum steam for wool or maximum steam for linen. Set the control to 0 (Dry Iron) setting to iron without steam.
Auto Shutoff Reset Button/Light |
|
This light comes on when the iron is | Button |
first plugged in. After one hour, the |
|
iron will shut off and the light will go out. |
|
Push the Reset Button to turn the iron |
|
back on. |
|
| Light |
Power On Light
The light stays on even if Temperature Control Dial is turned to Off.
Caring and Cleaning
Iron Storage
1.The water tank of your iron should be emptied after each use. Turn Temperature Control Dial to Off. Unplug the iron and hold over a sink. Slowly tilt pointed end of iron down over sink. Water will run out of water tank opening.
2.After iron has completely cooled, wrap cord loosely around iron and store in an upright position. Do not store iron laying flat on soleplate.
Soleplate
1.Never iron over zippers, pins, metal rivets, or snaps, as these may scratch the soleplate.
2.To clean occasional
3.Always store iron upright in the heel rest position.
Self-Clean
To maintain optimum steam performance of your iron:
Rotate the adjustable steam control from 0 to 4 several times to remove debris and minerals from the steam valve.
6 | 7 |