Using Your Iron
To Dry Iron
1.Plug iron into outlet.
2.Set the Adjustable Steam Switch to O (the Dry Iron position).
3.Turn Temperature Control Dial to desired temperature. Allow two
minutes for iron to reach desired temperature.
4.To turn iron Off, turn Temperature Control Dial to Off and unplug iron.
To Steam Iron
1.Unplug iron. Using a cup, slowly pour 5 ounces
Opening | of tap water |
| into water tank |
| opening. |
| Do not fill iron |
| directly from |
| the faucet. |
2.Plug iron into outlet.
3.Turn the Temperature Control Dial to desired fabric setting in the steam range. Set the Adjustable Steam Switch
to the recom- mended steam level. See the
“Fabric Setting Chart” on page 3.
4.Allow two minutes for the iron to reach desired temperature.
5.To turn iron off, set Adjustable Steam Switch to O (Dry Iron). Turn the Temperature Control Dial to Off. Unplug iron.
6.Empty water from the iron following directions in “Caring for Your Iron.”
Water
Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron.
5