840173100 Ev02 12/11/07 1:11 PM Page 4
TO DRY IRON
1.Plug iron into outlet.
2.Turn Adjustable Steam to Dry Iron.
3.Set Fabric Setting Indicator to desired temperature. Allow three minutes for iron to reach desired temperature.
4.To turn iron off, set Fabric Setting Indicator to OFF (O) and unplug iron.
TO STEAM IRON
1.Unplug iron. Open water tank fill cover. Using a cup, slowly pour 10 ounces (310 ml) of tap water into the water tank opening. Close water tank fill cover.
2.Plug in iron.
3.Press Temperature Selector. With iron in an upright position, set Fabric Setting Indicator to desired setting in steam range. Allow 3 minutes for iron to reach desired temperature. Do not preheat the iron with the soleplate facing down.
4.Set Adjustable Steam to desired steam output.
5.To turn iron off, turn Adjustable Steam to Dry Iron. Press Temperature Selector.
Set Fabric Setting Indicator to OFF (O) and unplug iron.
6.Empty water from the iron following directions in “Caring for Your Iron and Soleplate.”
Water
Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron.
FABRIC SETTING CHART
Steam | Temperature Setting | Ironing Instructions | |
Setting |
|
|
|
|
|
|
|
| Off | 0 |
|
| Nylon | 1 | Dry iron on reverse side of fabric. |
|
|
|
|
| Acrylic | 2 | Dry iron on reverse side of fabric. |
| Silk | 2 | Dry iron on reverse side of fabric. |
|
|
|
|
| Polyester | 3 | Iron while fabric is still damp. |
| Rayon | 4 | Iron on reverse side of fabric. |
|
|
|
|
| Wool | 4 | Steam iron on reverse side of fabric. |
| Cotton | 5 | Iron while still damp using steam and/or spray. |
|
|
|
|
| Linen | 6 | Iron on reverse side of fabric while still damp. |
|
|
|
|
4